hp leserjet 1020 not installing in ubuntu 10.04

Kindly provide the hp-check output. run command 'hp-check' on your terminal and paste the output here

ysingh@ysingh-desktop:~$ hp-check

HP Linux Imaging and Printing System (ver. 3.10.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux ysingh-desktop 2.6.32-36-generic #79-Ubuntu SMP Tue Nov 8 22:29:26 UTC 2011 i686 GNU/Linux

Distribution:
ubuntu 10.04

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.2 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: debug

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.10.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.10.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.2rc1.9
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = HP-LaserJet-1020
working_dir = /home/ysingh/Desktop/updt/hplip-3.11.10.run
device_uri = "hp:/usb/HP_LaserJet_1020?serial=FN048ZF"

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[installation]
version = 3.10.2rc1.9
date_time = Saturday 17 December 2011 10:30:14

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = true
type = 1

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Hewlett-Packard-HP-LaserJet-1020
--------------------------------
Type: Unknown
Device URI: usb://HP/LaserJet%201020?serial=FN048ZF
PPD: /etc/cups/ppd/Hewlett-Packard-HP-LaserJet-1020.ppd
PPD Description: HP LaserJet 1020 Foomatic/foo2zjs (recommended)
Printer status: printer Hewlett-Packard-HP-LaserJet-1020 is idle. enabled since Friday 16 December 2011 12:20:57 PM IST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

---------------
| USER GROUPS |
---------------

ysingh adm lp dialout cdrom plugdev lpadmin admin sambashare

User member of group 'lp'. Enables print/ scan/ fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 1 error or warning.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.

I have CanoScan N 640P ex attached with parallel port. It works fine with window xp, but is not detected by Ubuntu. Could you please help.

For non functioning of HP Printer & Scanner I am forced to use windows.

Y Singh

My third problem is of networking. I do not get eth0 as am hooked with local host. As result I am able to download driver through HP .

Hi Y Singh,

HPLIP has disabled parallel port by default. In order to enable it please use following steps.

1) You can down load latest HPLIP 3-11.10 version from from http://hplipopensource.com/hplip-web/install/install/index.html and install as mentioned in site (this is preferred but not must)

2) Then run the commands in the terminal
        => cd hplip-3.11.10 ( if hplip-3.11.10.run file is download, same location "hplip-3.11.10" folder would have been created. this could be hplip-3.10.2 if didn't downloaded latest version)
        => ./configure --prefix=/usr --enable-pp-build
        => make clean all
        => sudo make install

3) run "hp-setup" command and now parallel port option should have been enabled. select parallel port option (4th option).

Thanks & regards,
Amarnath