HPLIP

Unsupported model: Photosmart_5510_series

Asked by Jens Lehmann

I'm trying to use my new HP PhotoSmart 5510 with Ubuntu. hp-setup doesn't find the USB connected printer. With Windows 7 I have no problems with printing or scanning. ...but I desperately need to use the printer with Ubuntu. What am I doing wrong?

Here is my hp-check log:

jens@CAESAR:~/Downloads/hplip-3.11.10$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.11.10)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to
successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies
installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux CAESAR 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux

Distribution:
ubuntu 11.10

Checking Python version...
OK, version 2.7.2 installed

Checking PyQt 4.x version...
OK, version 4.8.5 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.5.0
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.84.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.11.10 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.11.10

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-3.11.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1

Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 10.12.2011 17:29:15
version = 3.11.10

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

lpstat
------
Type: Unknown
Device URI: No destinations added.

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0xa111 at 002:010:
    Device URI: hp:/usb/Photosmart_5510_series?serial=CN17R042deleted
error: Unsupported model: Photosmart_5510_series

---------------
| USER GROUPS |
---------------

jens adm lp dialout cdrom plugdev lpadmin admin sambashare

User member of group 'lp'. Enables print/ scan/ fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

No errors or warnings.

Done.

Question information

Language:
English Edit question
Status:
Solved
For:
HPLIP Edit question
Assignee:
No assignee Edit question
Solved by:
Sanjay Kumar
Solved:
Last query:
Last reply:
Revision history for this message
Jens Lehmann (je-le) said : 		#1

I thought this model is supported?

http://hplipopensource.com/hplip-web/models/photosmart/photosmart_5510_series.html

Revision history for this message
Best Sanjay Kumar (sanjay-kumar14) said : 		#2

Hello Jens,

Does your printer support duplex printing. If yes then we will have this supported it in the next HPLIP release (very soon).

Moreover please power on the device and connect it to Linux PC via USB and then send me the output of following command to get more details of your device.

     ===> sudo lsusb -v

Thanks,
Sanjay

Revision history for this message
Jens Lehmann (je-le) said : 		#3

Motherboard is a ASUS P8Z68-V/GEN3. Attached USB devices are Logitech G19 Keyboard, Logitech G5 Mouse, HP PhotoSmart 5510 e-All-in-One Printer (no duplex). I don't use a USB-Hub, USB Devices are directly connected to the back-panel of the motherboard.

Here you go:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed (or root) hub
  bMaxPacketSize0 64
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0002 2.0 root hub
  bcdDevice 3.00
  iManufacturer 3 Linux 3.0.0-14-generic ehci_hcd
  iProduct 2 EHCI Host Controller
  iSerial 1 0000:00:1a.0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0004 1x 4 bytes
        bInterval 12
Hub Descriptor:
  bLength 9
  bDescriptorType 41
  nNbrPorts 2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood 10 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00
  PortPwrCtrlMask 0xff
 Hub Port Status:
   Port 1: 0000.0507 highspeed power suspend enable connect
   Port 2: 0000.0100 power
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed (or root) hub
  bMaxPacketSize0 64
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0002 2.0 root hub
  bcdDevice 3.00
  iManufacturer 3 Linux 3.0.0-14-generic ehci_hcd
  iProduct 2 EHCI Host Controller
  iSerial 1 0000:00:1d.0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0004 1x 4 bytes
        bInterval 12
Hub Descriptor:
  bLength 9
  bDescriptorType 41
  nNbrPorts 2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood 10 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00
  PortPwrCtrlMask 0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 1 Single TT
  bMaxPacketSize0 64
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0002 2.0 root hub
  bcdDevice 3.00
  iManufacturer 3 Linux 3.0.0-14-generic xhci_hcd
  iProduct 2 xHCI Host Controller
  iSerial 1 0000:03:00.0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0004 1x 4 bytes
        bInterval 12
Hub Descriptor:
  bLength 9
  bDescriptorType 41
  nNbrPorts 2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood 10 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00
  PortPwrCtrlMask 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 3.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 3
  bMaxPacketSize0 9
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0003 3.0 root hub
  bcdDevice 3.00
  iManufacturer 3 Linux 3.0.0-14-generic xhci_hcd
  iProduct 2 xHCI Host Controller
  iSerial 1 0000:03:00.0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 31
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0004 1x 4 bytes
        bInterval 12
        bMaxBurst 0
Hub Descriptor:
  bLength 12
  bDescriptorType 42
  nNbrPorts 2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood 10 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  bHubDecLat 0.0 micro seconds
  wHubDelay 0 nano seconds
  DeviceRemovable 0x00
 Hub Port Status:
   Port 1: 0000.02a0 5Gbps power Rx.Detect
   Port 2: 0000.02a0 5Gbps power Rx.Detect
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 1 Single TT
  bMaxPacketSize0 64
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0002 2.0 root hub
  bcdDevice 3.00
  iManufacturer 3 Linux 3.0.0-14-generic xhci_hcd
  iProduct 2 xHCI Host Controller
  iSerial 1 0000:06:00.0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0004 1x 4 bytes
        bInterval 12
Hub Descriptor:
  bLength 9
  bDescriptorType 41
  nNbrPorts 2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood 10 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00
  PortPwrCtrlMask 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 3.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 3
  bMaxPacketSize0 9
  idVendor 0x1d6b Linux Foundation
  idProduct 0x0003 3.0 root hub
  bcdDevice 3.00
  iManufacturer 3 Linux 3.0.0-14-generic xhci_hcd
  iProduct 2 xHCI Host Controller
  iSerial 1 0000:06:00.0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 31
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0004 1x 4 bytes
        bInterval 12
        bMaxBurst 0
Hub Descriptor:
  bLength 12
  bDescriptorType 42
  nNbrPorts 2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood 10 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  bHubDecLat 0.0 micro seconds
  wHubDelay 0 nano seconds
  DeviceRemovable 0x00
 Hub Port Status:
   Port 1: 0000.02a0 5Gbps power Rx.Detect
   Port 2: 0000.02a0 5Gbps power Rx.Detect
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 1 Single TT
  bMaxPacketSize0 64
  idVendor 0x8087 Intel Corp.
  idProduct 0x0024 Integrated Rate Matching Hub
  bcdDevice 0.00
  iManufacturer 0
  iProduct 0
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0001 1x 1 bytes
        bInterval 12
Hub Descriptor:
  bLength 9
  bDescriptorType 41
  nNbrPorts 6
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood 50 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00
  PortPwrCtrlMask 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
Device Qualifier (for other device speed):
  bLength 10
  bDescriptorType 6
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed (or root) hub
  bMaxPacketSize0 64
  bNumConfigurations 1
Device Status: 0x0001
  Self Powered

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 1 Single TT
  bMaxPacketSize0 64
  idVendor 0x8087 Intel Corp.
  idProduct 0x0024 Integrated Rate Matching Hub
  bcdDevice 0.00
  iManufacturer 0
  iProduct 0
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed (or root) hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 12
Hub Descriptor:
  bLength 11
  bDescriptorType 41
  nNbrPorts 8
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood 50 * 2 milli seconds
  bHubContrCurrent 0 milli Ampere
  DeviceRemovable 0x00 0x00
  PortPwrCtrlMask 0xff 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0503 highspeed power enable connect
   Port 4: 0000.0100 power
   Port 5: 0000.0103 power enable connect
   Port 6: 0000.0503 highspeed power enable connect
   Port 7: 0000.0103 power enable connect
   Port 8: 0000.0100 power
Device Qualifier (for other device speed):
  bLength 10
  bDescriptorType 6
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed (or root) hub
  bMaxPacketSize0 64
  bNumConfigurations 1
Device Status: 0x0001
  Self Powered

Bus 002 Device 003: ID 03f0:a111 Hewlett-Packard
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  idVendor 0x03f0 Hewlett-Packard
  idProduct 0xa111
  bcdDevice 1.00
  iManufacturer 1 HP
  iProduct 2 Photosmart 5510 series
  iSerial 3 CN17R042PB05NR
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 108
    bNumInterfaces 4
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
      Self Powered
    MaxPower 2mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 3
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 204
      bInterfaceProtocol 0
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x01 EP 1 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 7
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 7 Printer
      bInterfaceSubClass 1 Printer
      bInterfaceProtocol 2 Bidirectional
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x08 EP 8 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x89 EP 9 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 2
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 8 Mass Storage
      bInterfaceSubClass 6 SCSI
      bInterfaceProtocol 80 Bulk (Zip)
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x04 EP 4 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x85 EP 5 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 3
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 4
      bInterfaceProtocol 1
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x0a EP 10 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x8b EP 11 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
Device Qualifier (for other device speed):
  bLength 10
  bDescriptorType 6
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  bNumConfigurations 1
Device Status: 0x0001
  Self Powered

Bus 002 Device 004: ID 046d:c049 Logitech, Inc. G5 Laser Mouse
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 8
  idVendor 0x046d Logitech, Inc.
  idProduct 0xc049 G5 Laser Mouse
  bcdDevice 52.00
  iManufacturer 1 Logitech
  iProduct 2 USB Gaming Mouse
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 59
    bNumInterfaces 2
    bConfigurationValue 1
    iConfiguration 4 U52.0 B0005
    bmAttributes 0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower 98mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 3 Human Interface Device
      bInterfaceSubClass 1 Boot Interface Subclass
      bInterfaceProtocol 2 Mouse
      iInterface 0
        HID Device Descriptor:
          bLength 9
          bDescriptorType 33
          bcdHID 1.11
          bCountryCode 0 Not supported
          bNumDescriptors 1
          bDescriptorType 34 Report
          wDescriptorLength 94
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x000a 1x 10 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 3 Human Interface Device
      bInterfaceSubClass 0 No Subclass
      bInterfaceProtocol 0 None
      iInterface 0
        HID Device Descriptor:
          bLength 9
          bDescriptorType 33
          bcdHID 1.11
          bCountryCode 0 Not supported
          bNumDescriptors 1
          bDescriptorType 34 Report
          wDescriptorLength 54
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0014 1x 20 bytes
        bInterval 10
Device Status: 0x0000
  (Bus Powered)

Bus 002 Device 005: ID 05e3:0607 Genesys Logic, Inc.
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 2 TT per port
  bMaxPacketSize0 64
  idVendor 0x05e3 Genesys Logic, Inc.
  idProduct 0x0607
  bcdDevice 8.01
  iManufacturer 0
  iProduct 1 USB2.0 Hub
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 41
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 100mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 1 Single TT
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0001 1x 1 bytes
        bInterval 12
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 1
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 2 TT per port
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0001 1x 1 bytes
        bInterval 12
Hub Descriptor:
  bLength 9
  bDescriptorType 41
  nNbrPorts 4
  wHubCharacteristic 0x00e9
    Per-port power switching
    Per-port overcurrent protection
    TT think time 32 FS bits
    Port indicators
  bPwrOn2PwrGood 50 * 2 milli seconds
  bHubContrCurrent 100 milli Ampere
  DeviceRemovable 0x00
  PortPwrCtrlMask 0xff
 Hub Port Status:
   Port 1: 0000.0303 lowspeed power enable connect
   Port 2: 0000.0503 highspeed power enable connect
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Qualifier (for other device speed):
  bLength 10
  bDescriptorType 6
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed (or root) hub
  bMaxPacketSize0 64
  bNumConfigurations 1
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 007: ID 046d:c228 Logitech, Inc.
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 8
  idVendor 0x046d Logitech, Inc.
  idProduct 0xc228
  bcdDevice 1.10
  iManufacturer 0
  iProduct 2 G19 Gaming Keyboard
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 59
    bNumInterfaces 2
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower 100mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 3 Human Interface Device
      bInterfaceSubClass 1 Boot Interface Subclass
      bInterfaceProtocol 1 Keyboard
      iInterface 0
        HID Device Descriptor:
          bLength 9
          bDescriptorType 33
          bcdHID 1.10
          bCountryCode 0 Not supported
          bNumDescriptors 1
          bDescriptorType 34 Report
          wDescriptorLength 64
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0008 1x 8 bytes
        bInterval 24
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 3 Human Interface Device
      bInterfaceSubClass 0 No Subclass
      bInterfaceProtocol 0 None
      iInterface 0
        HID Device Descriptor:
          bLength 9
          bDescriptorType 33
          bcdHID 1.10
          bCountryCode 0 Not supported
          bNumDescriptors 1
          bDescriptorType 34 Report
          wDescriptorLength 81
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0008 1x 8 bytes
        bInterval 24
Device Status: 0x0000
  (Bus Powered)

Bus 002 Device 008: ID 046d:c229 Logitech, Inc.
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  idVendor 0x046d Logitech, Inc.
  idProduct 0xc229
  bcdDevice 0.23
  iManufacturer 1 Logitech
  iProduct 2 G19 Gaming Keyboard
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 57
    bNumInterfaces 2
    bConfigurationValue 1
    iConfiguration 4 Carson Jan 16 2009 11:15:45
    bmAttributes 0xc0
      Self Powered
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 0
      bInterfaceProtocol 0
      iInterface 5 G19 Gaming Keyboard (Display interface)
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 7
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x02 EP 2 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 3 Human Interface Device
      bInterfaceSubClass 0 No Subclass
      bInterfaceProtocol 0 None
      iInterface 6 G19 Gaming Keyboard (Macro interface)
        HID Device Descriptor:
          bLength 9
          bDescriptorType 33
          bcdHID 1.11
          bCountryCode 33 US
          bNumDescriptors 1
          bDescriptorType 34 Report
          wDescriptorLength 97
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0007 1x 7 bytes
        bInterval 7
Device Qualifier (for other device speed):
  bLength 10
  bDescriptorType 6
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  bNumConfigurations 1
Device Status: 0x0001
  Self Powered

Bus 002 Device 009: ID 0b05:179c ASUSTek Computer, Inc.
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.10
  bDeviceClass 224 Wireless
  bDeviceSubClass 1 Radio Frequency
  bDeviceProtocol 1 Bluetooth
  bMaxPacketSize0 64
  idVendor 0x0b05 ASUSTek Computer, Inc.
  idProduct 0x179c
  bcdDevice 0.01
  iManufacturer 0
  iProduct 0
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 177
    bNumInterfaces 2
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 100mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 3
      bInterfaceClass 224 Wireless
      bInterfaceSubClass 1 Radio Frequency
      bInterfaceProtocol 1 Bluetooth
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0010 1x 16 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x02 EP 2 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 224 Wireless
      bInterfaceSubClass 1 Radio Frequency
      bInterfaceProtocol 1 Bluetooth
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0000 1x 0 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x03 EP 3 OUT
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0000 1x 0 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 1
      bNumEndpoints 2
      bInterfaceClass 224 Wireless
      bInterfaceSubClass 1 Radio Frequency
      bInterfaceProtocol 1 Bluetooth
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0009 1x 9 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x03 EP 3 OUT
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0009 1x 9 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 2
      bNumEndpoints 2
      bInterfaceClass 224 Wireless
      bInterfaceSubClass 1 Radio Frequency
      bInterfaceProtocol 1 Bluetooth
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0011 1x 17 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x03 EP 3 OUT
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0011 1x 17 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 3
      bNumEndpoints 2
      bInterfaceClass 224 Wireless
      bInterfaceSubClass 1 Radio Frequency
      bInterfaceProtocol 1 Bluetooth
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0019 1x 25 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x03 EP 3 OUT
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0019 1x 25 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 4
      bNumEndpoints 2
      bInterfaceClass 224 Wireless
      bInterfaceSubClass 1 Radio Frequency
      bInterfaceProtocol 1 Bluetooth
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0021 1x 33 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x03 EP 3 OUT
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0021 1x 33 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 5
      bNumEndpoints 2
      bInterfaceClass 224 Wireless
      bInterfaceSubClass 1 Radio Frequency
      bInterfaceProtocol 1 Bluetooth
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0031 1x 49 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x03 EP 3 OUT
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0031 1x 49 bytes
        bInterval 1
Device Status: 0x0003
  Self Powered
  Remote Wakeup Enabled

Revision history for this message
Sanjay Kumar (sanjay-kumar14) said : 		#4

Hi,

Thanks for the logs. This model is already supported in HPLIP-3.11.10 and should have worked correctly. However to help us understand and analyze the issue please install HPLIP-3.11.10 release from http://hplipopensource.com/hplip-web/index.html (Automatic Mode) and then run following commands in the terminal.

1) sudo cp -rf /usr/lib64 /usr/lib

2) system-config-printer (Then remove all print queues)

3) hp-setup -g (follow on screen instructions)

4) Try printing a document.

=>If problem does not get resolved the Please do the following to capture some logs.

    a)Open /etc/cups/cupsd.conf in root mode and replace

        LogLevel warn

          with

       LogLevel debug
       hpLogLevel 15

    b) Open Terminal and run following commands:
       => sudo su
       => /etc/init.d/cups restart
                  or
       => service cups restart
       => hp-check -t > /tmp/hpcheck.log
       => hp-setup -g > /tmp/hpsetup.log

    c) Please send
          => /var/log/syslog (if present),
          => /var/log/cups/error_log
          => /tmp/hpcheck.log
          => /tmp/hpsetup.log

For attaching the logs please create a bug at https://bugs.launchpad.net/hplip/+filebug
 and then attach the logs, because you wont be able to attach them here.

Revision history for this message
goutam kodu (goutam-hplip) said : 		#5

Hi Jens Lehmann ,

Printer Photosmart_5510_series is supported in 3.11.10 version of hplip.
You need to add the "lp" and "lpadmin" group to the user. As normal user you will not have privilege to add the USB connected printer.
Please run the below commands in terminal to add the user to "lp" and "lpadmin" group to the user.

sudo usermod -a -G lp,lpadmin $USER

Restart your PC. Run command "hp-setup" in terminal to configure your printer.
Let us know if you are still facing the issue.

Thanks,
Goutam Kodu

Revision history for this message
Jens Lehmann (je-le) said : 		#6

Goutam,

as stated in the first post the user ("jens") was already member of the "lp" and "lpadmin" groups ... all the time.

This morning I purged every (hplip*, xsane etc.) and started again (like many times) but with the new HPLIP 3.11.12

Now this time the 5510 is discovered by hp-setup. FINALLY! :-) Now I am able to scan and everything works like a charme.

Thank you for all your efforts.

Revision history for this message
Jens Lehmann (je-le) said : 		#7

Thanks Sanjay Kumar, that solved my question.