HP 1220C/PS HAS ERROR CODE 5012

richard@richard-desktop:~$ dpkg -l hplip
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Description
+++-==============-==============-============================================
ii hplip 3.11.1-2ubuntu HP Linux Printing and Imaging System (HPLIP)
richard@richard-desktop:~$

Hi,

Please install the latest hplip-3.11.5. You can find the same at http://hplipopensource.com/hplip-web/gethplip.html. Let us know if you are facing the same on the latest. If problem still persist post us the out-put of hp-check -t command.

Thanks & Regards,
Goutam Kodu

I also get error 5012 when I try to install hplip 3.11.5. the following is my summary of hp-check -t
------------------------------------------------------
dick@dick:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.11.5)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux dick 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux

Distribution:
ubuntu 11.04

Checking Python version...
OK, version 2.7.1 installed

Checking PyQt 4.x version...
OK, version 4.8.3 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.4.6
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.1

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.11.5 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.11.5

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.11.5
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.5
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = PSC-1400-series
working_dir = .
device_uri = "hp:/usb/PSC_1400_series?serial=CN5CQD21MM04BN"

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[installation]
version = 3.11.5
date_time = 05/22/2011 09:17:57

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

PSC-1400-series
---------------
Type: Printer
Device URI: hp:/usb/PSC_1400_series?serial=CN5CQD21MM04BN
PPD: /etc/cups/ppd/PSC-1400-series.ppd
PPD Description: HP PSC 1400 Series, hpcups 3.11.1
Printer status: printer PSC-1400-series is idle. enabled since Sun 22 May 2011 09:15:39/usr/lib/cups/backend/hp failed
error: Unable to communicate with device (code=12): hp:/usb/PSC_1400_series?serial=CN5CQD21MM04BN
error: Device not found
error: Communication status: Failed

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

---------------
| USER GROUPS |
---------------

dick adm lp dialout cdrom plugdev lpadmin admin sambashare mythtv

-----------
| SUMMARY |
-----------

error: 1 error or warning.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.
dick@dick:~$

Hi,

Can you provide us some more debug information.

Please follow the below steps to provide the same

1.Open the file /etc/cups/cupsd.conf in write permissions.
$sudo vim /etc/cups/cupsd.conf
 Change LogLevel warn to LogLevel debug and below that line add HPLogLevel 15. Like this

LogLevel debug
hpLogLevel 15

2. Restart the cups
$sudo /etc/init.d/cups restart

3. Enter the hplip source folder and open the file io/hpmud/hpmudi.h and uncomment the line containing this
//#define HPMUD_DEBUG and save it.

4.Open the terminal and change directory to hplip source directory and run "make" and su -c "make install" .

5.make the log file empty
$sudo cat /dev/null > /var/log/syslog

6. Send a small document for print.

7 When you get the "Device communication error" . Copy the contents of log file in text file and attach me that file
$sudo cat /var/log/syslog > debug.txt"

Attach me the debug.txt file.

Sorry for having you to do so much of work. Please let us know if you find any difficulty in obtaining the debug information.

Thanks & Regards,
Goutam Kodu