Cant get scanner to work

Hp 2050 all in one. Fedora linux 13 64bit.

I am unable to get xsane to recognise the scanner. have followed the insructions and advice from linux forums without success. Here is the output from HP-Check.

 [brian@mesh-fedora ~]$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.10.9)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux mesh-fedora 2.6.34.7-66.fc13.x86_64 #1 SMP Wed Dec 15 07:04:30 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux

Distribution:
fedora 13

Checking Python version...
OK, version 2.6.4 installed

Checking PyQt 4.x version...
OK, version 4.7.3 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.4.4
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.10.9 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.10.9

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/HP
ppdbase=/usr/share/cups/model
doc=/usr/share/doc/hplip-3.10.9
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.9.11
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = Deskjet_2050_J510
working_dir = .
device_uri = "hp:/usb/Deskjet_2050_J510_series?serial=CN07D2F0VY05D1"

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[installation]
version = 3.10.9.11
date_time = 02/25/2011 13:29:21

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI Model
  -------------------------------- ---------------------------
  hp:/usb/Deskjet_2050_J510_series HP Deskjet 2050 J510 series
  ?serial=CN07D2F0VY05D1

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

HP-Deskjet-2050-J510-series
---------------------------
Type: Printer
Device URI: hp:/usb/Deskjet_2050_J510_series?serial=CN07D2F0VY05D1
PPD: /etc/cups/ppd/HP-Deskjet-2050-J510-series.ppd
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.10.9
Printer status: printer HP-Deskjet-2050-J510-series is idle. enabled since Fri 25 Feb 2ready to printM GMT
Communication status: Good

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x8711 at 001:007:
    Device URI: hp:/usb/Deskjet_2050_J510_series?serial=CN07D2F0VY05D1
    Device node: /dev/bus/usb/001/007
    Mode: 0660
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/007
# owner: root
# group: lp
user::rw-
user:brian:rw-
group::rw-
group:lp:rw-
mask::rw-
other::---

---------------
| USER GROUPS |
---------------

brian sys lp

-----------
| SUMMARY |
-----------

No errors or warnings.

Done.
[brian@mesh-fedora ~]$
 Perhaps you can help me to get this equipment working.