HP Deskjet 2050 All-in-One J510 series driver
I've just bought a HP Deskjet 2050 All-in-One J510 series and Ubuntu 10.04 (32bits) can not find the driver. It is not working even though HPLIP iworks fine.
Question information
- Language:
- English Edit question
- Status:
- Expired
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Hi,
Please run hp-check -t and post the output
Thanks,
Anitha
Revision history for this message
|
#2 |
Dear Anitha,
Thank you for your response.
HP Linux Imaging and Printing System (ver. 3.10.2)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux josemgl-desktop 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC 2010 i686 GNU/Linux
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: el planificador de tareas se está ejecutando
Version: 1.4.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 3.10.2 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.10.2
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=no
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-
hpijs-only-build=no
Current contents of '/var/lib/
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/
[installation]
version = 3.10.2rc1.9
date_time = 14/07/10 12:43:41
-------
| DISCOVERED USB DEVICES |
-------
No devices found.
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
lpstat
------
Type: Unknown
Device URI: No destinations added.
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
'hpaio' in '/etc/sane.
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x8711 at 001:004:
Device URI: hp:/usb/
error: Unsupported model: Deskjet_
---------------
| USER GROUPS |
---------------
josemgl adm dialout cdrom plugdev lpadmin admin sambashare
error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.
-----------
| SUMMARY |
-----------
No errors or warnings.
Done.
Revision history for this message
|
#3 |
Hi,
Currently HP Deskjet 2050 All-in-One J510 series is not supported by HPLIP. Will keep you updated when it is supported.
Sorry for the inconvenience.
Thanks,
Anitha
Revision history for this message
|
#4 |
Hi,
Thank you anyway for your time.
Best Regards,
Jose
Revision history for this message
|
#5 |
Hi Jose,
Please try installing the latest hplip (3.10.6) release. You can download the latest hplip 3.10.6 release from http://
Thanks for your support towards HPLIP.
Thanks and Regards,
Srikanth Lokare
Revision history for this message
|
#6 |
Hi Srikanth,
Thanks for your answer. It worked!
Best Regards,
Jose González
Revision history for this message
|
#7 |
Hi there,
The printer is now printing well but i can not scan anything as it said "Not scanner detected".
Any ideas?
Thank you very much
Revision history for this message
|
#8 |
Hi Jose,
Scanner is currently not supported for HP DeskJet 2050 All-in-One J510 series by HPLIP. Will keep you updated when it is supported.
Sorry for the inconvenience.
Thanks for your support towards HPLIP.
Thanks and Regards,
Srikanth Lokare
Revision history for this message
|
#9 |
Hi Srikanth,
Thank you for your reply.
Best Regards,
Jose González
Revision history for this message
|
#10 |
This question was expired because it remained in the 'Open' state without activity for the last 15 days.
Revision history for this message
|
#11 |
hello.. currently using ubuntu 10.04 with hplip 3.10.9 printer works great, scanner not detected.
"No scanners were identified" is listed when scanimage -L
here is hp-check output, just in case:
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux tka 2.6.32-
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 3.10.9 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.10.9
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-
hpijs-only-build=no
Current contents of '/var/lib/
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.10.9.11
date_time = 10/14/2010 16:51:42
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
device_list =
interval = 5
-------
| DISCOVERED USB DEVICES |
-------
Device URI Model
-----
hp:/usb/
?serial=
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Deskjet_2050_J510
-----------------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.10.9
Printer status: printer Deskjet_2050_J510 is idle. enabled since Thu 14 Oct 2010 08:55:ready to print
Communication status: Good
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x8711 at 001:011:
Device URI: hp:/usb/
Device node: /dev/bus/
Mode: 0664
---------------
| USER GROUPS |
---------------
elqanah adm lp dialout fax cdrom floppy tape audio dip video plugdev fuse lpadmin netdev admin sambashare vboxusers
-----------
| SUMMARY |
-----------
No errors or warnings.
Done.
Revision history for this message
|
#12 |
Hello!
I have this all-in-one printer (HP DeskJet 2050 All-in-One J510).
With the latest hplip version (3.11.1) scan works!
I'm using Debian Wheezy. I found hplip 3.11.1 in "experimental" repository.
Bye! :)
Revision history for this message
|
#13 |
Hi there!
Thank you Gabriele, you made my life easiler!
Revision history for this message
|
#14 |
I am trying to get the same printer work unsuccessfully under Xubuntu, everything seems to be O.K. till I want to print, usually I get message to go to System>
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 3.11.3a currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.3a
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-
hpijs-only-build=no
Current contents of '/var/lib/
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/
[last_used]
printer_name = Deskjet_2050_J510
working_dir = .
device_uri = hp:/usb/
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.11.3a
date_time = 03/04/11 01:11:16
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = true
type = 1
[polling]
enable = false
device_list =
interval = 5
-------
| DISCOVERED USB DEVICES |
-------
Device URI Model
-----
hp:/usb/
?serial=
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Deskjet_2050_J510
-----------------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.11.3
Printer status: printer Deskjet_2050_J510 disabled since Thu 31 Mar 2011 02:10:15 CEST -/usr/lib/
Communication status: Good
Deskjet_2050_J510_2
-------------------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.11.3a
Printer status: printer Deskjet_2050_J510_2 now printing Deskjet_
Communication status: Good
HP_Deskjet_
-------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.11.3a
Printer status: printer HP_Deskjet_
Communication status: Good
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x8711 at 001:002:
Device URI: hp:/usb/
Device node: /dev/bus/
Mode: 0664
---------------
| USER GROUPS |
---------------
hynek adm lp dialout fax cdrom floppy tape dip video plugdev fuse lpadmin admin sambashare nopasswdlogin
-----------
| SUMMARY |
-----------
No errors or warnings.
Done.
hynek@hynek-
hp-check.log: command not found
hynek@hynek-
HP Linux Imaging and Printing System (ver. 3.11.3a)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux hynek-desktop 2.6.32-30-generic #59-Ubuntu SMP Tue Mar 1 21:30:21 UTC 2011 i686 GNU/Linux
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: debug
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 3.11.3a currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.3a
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-
hpijs-only-build=no
Current contents of '/var/lib/
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/
[last_used]
printer_name = Deskjet_2050_J510
working_dir = .
device_uri = hp:/usb/
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.11.3a
date_time = 03/04/11 01:15:42
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = true
type = 1
[polling]
enable = false
device_list =
interval = 5
-------
| DISCOVERED USB DEVICES |
-------
Device URI Model
-----
hp:/usb/
?serial=
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Deskjet_2050_J510
-----------------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.11.3
Printer status: printer Deskjet_2050_J510 disabled since Thu 31 Mar 2011 02:10:15 CEST -/usr/lib/
Communication status: Good
Deskjet_2050_J510_2
-------------------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.11.3a
Printer status: printer Deskjet_2050_J510_2 now printing Deskjet_
Communication status: Good
HP_Deskjet_
-------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.11.3a
Printer status: printer HP_Deskjet_
Communication status: Good
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x8711 at 001:002:
Device URI: hp:/usb/
Device node: /dev/bus/
Mode: 0664
---------------
| USER GROUPS |
---------------
hynek adm lp dialout fax cdrom floppy tape dip video plugdev fuse lpadmin admin sambashare nopasswdlogin
-----------
| SUMMARY |
-----------
No errors or warnings.
Done.
hynek@hynek-
HP Linux Imaging and Printing System (ver. 3.11.3a)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux hynek-desktop 2.6.32-30-generic #59-Ubuntu SMP Tue Mar 1 21:30:21 UTC 2011 i686 GNU/Linux
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: debug
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 3.11.3a currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.3a
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-
hpijs-only-build=no
Current contents of '/var/lib/
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/
[last_used]
printer_name = Deskjet_2050_J510
working_dir = .
device_uri = hp:/usb/
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.11.3a
date_time = 03/04/11 01:18:35
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = true
type = 1
[polling]
enable = false
device_list =
interval = 5
-------
| DISCOVERED USB DEVICES |
-------
Device URI Model
-----
hp:/usb/
?serial=
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Deskjet_2050_J510
-----------------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.11.3
Printer status: printer Deskjet_2050_J510 disabled since Thu 31 Mar 2011 02:10:15 CEST -/usr/lib/
Communication status: Good
Deskjet_2050_J510_2
-------------------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.11.3a
Printer status: printer Deskjet_2050_J510_2 now printing Deskjet_
Communication status: Good
HP_Deskjet_
-------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Deskjet 2050 j510 Series, hpcups 3.11.3a
Printer status: printer HP_Deskjet_
Communication status: Good
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x8711 at 001:002:
Device URI: hp:/usb/
Device node: /dev/bus/
Mode: 0664
---------------
| USER GROUPS |
---------------
hynek adm lp dialout fax cdrom floppy tape dip video plugdev fuse lpadmin admin sambashare nopasswdlogin
-----------
| SUMMARY |
-----------
No errors or warnings.
Done.
hynek@hynek-
pr 2 22:34:52 hynek-desktop kernel: [25061.987754] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Apr 2 22:52:22 hynek-desktop kernel: [26113.133039] usb 1-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
Apr 2 22:59:24 hynek-desktop kernel: [26535.831284] usblp0: removed
Apr 2 23:02:43 hynek-desktop kernel: [26734.028574] usb 1-3: usbfs: interface 1 claimed by usbfs while 'usb' sets config #1
Apr 2 23:03:35 hynek-desktop kernel: [26786.785091] usb 1-3: usbfs: interface 1 claimed by usbfs while 'usb' sets config #1
Apr 2 23:09:08 hynek-desktop kernel: [27119.542973] usb 1-3: usbfs: interface 1 claimed by usbfs while 'usb' sets config #1
Apr 3 00:32:48 hynek-desktop python: hplip-install[
Apr 3 00:33:59 hynek-desktop python: hplip-install[
Apr 3 00:33:59 hynek-desktop python: hplip-install[
Apr 3 01:40:23 hynek-desktop kernel: [36194.281090] python[1845]: segfault at 0 ip (null) sp bfae748c error 4 in libc-2.
tail -f /var/log/messages