HPLIP

Long edge duplex printing with OfficeJet8500 mirrors the back page

Asked by tomtom7

Hi, I'm using an "OfficeJetPro 8500 a909a" through ethernet with HPLIP 3.9.12 installed. Printing with the short edge duplex works fine, however, the long edge duplex option produces funny effects: the front page is fine but the back page is mirrored left right and up side down, thus the text is absolutely unreadable. I tried to play around with the settings both in the hp-toolbox and in the system-config-printer settings (working on debian lenny), but the problem remains. Here is my hp-check output:

HP Linux Imaging and Printing System (ver. 3.9.12)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux bobpc1 2.6.26-2-vserver-amd64 #1 SMP Tue Jan 12 23:33:36 UTC 2010 x86_64 GNU/Linux

Distribution:
debian 5.0.4

Checking Python version...
OK, version 2.5.2 installed

Checking PyQt 4.x version...
OK, version 4.4.2 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.3.8
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.4

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.9.12 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.9.12

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.9.12
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.12.29
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = Officejet_Pro_8500_A909a
working_dir = .
device_uri = "hp:/net/Officejet_Pro_8500_A909a?zc=dhcppc2"

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[installation]
version = 3.9.12.29
date_time = 02/13/2010 12:52:24

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Officejet_Pro_8500_A909a
------------------------
Type: Printer
Device URI: hp:/net/Officejet_Pro_8500_A909a?zc=dhcppc2
PPD: /etc/cups/ppd/Officejet_Pro_8500_A909a.ppd
PPD Description: HP Officejet Pro 8500 a909a, hpcups 3.9.12
Printer status: printer Officejet_Pro_8500_A909a is idle. enabled since Sat 13 Feb 2010 12:50:18 PM CET
Communication status: Good

Officejet_Pro_8500_A909a_fax
----------------------------
Type: Fax
Device URI: hpfax:/net/Officejet_Pro_8500_A909a?zc=dhcppc2
PPD: /etc/cups/ppd/Officejet_Pro_8500_A909a_fax.ppd
PPD Description: HP Fax hpcups
Printer status: printer Officejet_Pro_8500_A909a_fax is idle. enabled since Thu 28 Jan 2010 04:05:49 PM CET
Communication status: Good

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/net/Officejet_Pro_8500_A909a?zc=dhcppc2' is a Hewlett-Packard Officejet_Pro_8500_A909a all-in-one

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

---------------
| USER GROUPS |
---------------

jeremie lp dialout cdrom floppy audio video plugdev netdev powerdev

-----------
| SUMMARY |
-----------

No errors or warnings.

Question information

Language:
English Edit question
Status:
Solved
For:
HPLIP Edit question
Assignee:
No assignee Edit question
Solved by:
tomtom7
Solved:
Last query:
Last reply:
Revision history for this message
didier973 (didier-herisson) said : 		#1

I'm using Mandriva 2010 provided drivers, everything was working rpoerly until yesterday: after a short electricity cut, my printer wasn't responding (the printer shutdown, but not the PC, when the current went back, the printer restarted, i guess its identification changed on the USB).
I decided then to refresh the printer list, the printer was (re)discovered, I just had to validate the default choices for the drivers and option (autoduplexer ->installed, double side printing->long edge). I had the choice between hplip-3.9.12 or hplip-3.9.12.29, I started with the second, but finally tried both.

Now, when double-side printing, I have the back page which has to be read through a mirror. I tried to change anything looking relevant using the Mandriva's provided tool for printer installation, the cups server interface or the HPLIP HP Device Manager, but couldn't manage to get it work again properly :(.

I would like to copy there configuration files, but don't know which could be interesting... Please ask for any relevant information!

Revision history for this message
tomtom7 (bobo-grelu) said : 		#2

Thanks for the answers. I've updated my ghoscript version to 8.71 and the problem is now solved.

Revision history for this message
florianr (florianr-gmx) said : 		#3

I have the problem as described by the OP. first page is fine , also the margins but the backside is mirrored. This is since I upgraded my hplip to Version 3.10. (with the hplip Ver. 3.9 I had the problem, that the first page was shifted down about 1cm to that the End was cut off -- this problem is now gone with the 3.10 Version.

I allready have ghostscrip 8.71. I use fedora 12.

hp-check:
hp-check[5711]: info: :
Initializing. Please wait...
Fedora

12

Scheduler ist aktiv

Linux f12.localdomain 2.6.31.5-127.fc12.i686 #1 SMP Sat Nov 7 21:41:45 EST 2009 i686 i686 i386 GNU/Linux

hp-check[5711]: info: :
hp-check[5711]: info: :---------------
hp-check[5711]: info: :| SYSTEM INFO |
hp-check[5711]: info: :---------------
hp-check[5711]: info: :
hp-check[5711]: info: :Basic system information:
hp-check[5711]: info: :Linux f12.localdomain 2.6.31.5-127.fc12.i686 #1 SMP Sat Nov 7 21:41:45 EST 2009 i686 i686 i386 GNU/Linux
hp-check[5711]: info: :
hp-check[5711]: info: :Distribution:
hp-check[5711]: info: :fedora 12
hp-check[5711]: info: :
hp-check[5711]: info: :Checking Python version...
hp-check[5711]: info: :OK, version 2.6.2 installed
hp-check[5711]: info: :
hp-check[5711]: info: :Checking PyQt 4.x version...
hp-check[5711]: info: :OK, version 4.7 installed.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for CUPS...
hp-check[5711]: info: :Status: Scheduler ist aktiv
error: Version: (Not available. CUPS may not be installed or not running.)
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dbus/python-dbus...
hp-check[5711]: info: :dbus daemon is running.
hp-check[5711]: info: :python-dbus version: 0.83.0
hp-check[5711]: info: :
hp-check[5711]: info: :
hp-check[5711]: info: :------------------------------------
hp-check[5711]: info: :| COMPILE AND RUNTIME DEPENDENCIES |
hp-check[5711]: info: :------------------------------------
hp-check[5711]: info: :
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: CUPS - Common Unix Printing System...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: CUPS devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
hp-check[5711]: info: :To install this dependency, execute this command:
hp-check[5711]: info: :su -c "yum -y -d 10 -e 1 install cups-devel"
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: CUPS image - CUPS image development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
hp-check[5711]: info: :To install this dependency, execute this command:
hp-check[5711]: info: :su -c "yum -y -d 10 -e 1 install cups-devel"
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: DBus - Message bus system...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: gcc - GNU Project C and C++ Compiler...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: libcrypto - OpenSSL cryptographic library...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: libjpeg - JPEG library...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
hp-check[5711]: info: :To install this dependency, execute this command:
hp-check[5711]: info: :su -c "yum -y -d 10 -e 1 install net-snmp-devel"
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: libpthread - POSIX threads library...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: libtool - Library building support services...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: libusb - USB library...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: make - GNU make utility to maintain groups of programs...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: PolicyKit - Administrative policy framework...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: Python DBus - Python bindings for DBus...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: Python devel - Python development files...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: Python XML libraries...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: Python 2.3 or greater - Required for fax functionality...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: Python 2.2 or greater - Python programming language...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: Reportlab - PDF library for Python...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: SANE - Scanning library...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: SANE - Scanning library development files...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: scanimage - Shell scanning program...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking for dependency: xsane - Graphical scanner frontend for SANE...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :
hp-check[5711]: info: :----------------------
hp-check[5711]: info: :| HPLIP INSTALLATION |
hp-check[5711]: info: :----------------------
hp-check[5711]: info: :
hp-check[5711]: info: :
hp-check[5711]: info: :Currently installed HPLIP version...
hp-check[5711]: info: :HPLIP 3.10.2 currently installed in '/usr/share/hplip'.
hp-check[5711]: info: :
hp-check[5711]: info: :Current contents of '/etc/hp/hplip.conf' file:
hp-check[5711]: info: :# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.10.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.10.2
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.2rc1.9
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no

hp-check[5711]: info: :
hp-check[5711]: info: :Current contents of '/var/lib/hp/hplip.state' file:
hp-check[5711]: info: :# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

hp-check[5711]: info: :
hp-check[5711]: info: :Current contents of '~/.hplip/hplip.conf' file:
hp-check[5711]: info: :[last_used]
printer_name = text
working_dir = .
device_uri = hp:/net/Officejet_Pro_8500_A909g?ip=192.168.178.54

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[installation]
version = 3.10.2rc1.9
date_time = 29.03.2010 22:55:49

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5

hp-check[5711]: info: :
hp-check[5711]: info: :--------------------------
hp-check[5711]: info: :| DISCOVERED USB DEVICES |
hp-check[5711]: info: :--------------------------
hp-check[5711]: info: :
hp-check[5711]: info: :No devices found.
hp-check[5711]: info: :
hp-check[5711]: info: :---------------------------------
hp-check[5711]: info: :| INSTALLED CUPS PRINTER QUEUES |
hp-check[5711]: info: :---------------------------------
hp-check[5711]: info: :
hp-check[5711]: info: :
hp-check[5711]: info: :FS-1010
hp-check[5711]: info: :-------
hp-check[5711]: info: :Type: Unknown
hp-check[5711]: info: :Device URI: usb://Kyocera/FS-1010
hp-check[5711]: info: :PPD: /etc/cups/ppd/FS-1010.ppd
hp-check[5711]: info: :PPD Description: Kyocera FS-1010 - CUPS+Gutenprint v5.2.5 Simplified
hp-check[5711]: info: :Printer status: Drucker „FS-1010“ deaktiviert seit Di 16 Mär 2010 10:48:02 CET - Unplugged or turned off
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
hp-check[5711]: info: :
hp-check[5711]: info: :Officejet_Pro_8500_A909g_fax
hp-check[5711]: info: :----------------------------
hp-check[5711]: info: :Type: Fax
hp-check[5711]: info: :Device URI: hpfax:/net/Officejet_Pro_8500_A909g?ip=192.168.178.54
hp-check[5711]: info: :PPD: /etc/cups/ppd/Officejet_Pro_8500_A909g_fax.ppd
hp-check[5711]: info: :PPD Description: HP Fax hpcups
hp-check[5711]: info: :Printer status: Drucker „Officejet_Pro_8500_A909g_fax“ ist inaktiv; aktiviert seit Mo 29 Mär 2010 22:27:49 CEST
hp-check[5711]: info: :Communication status: Good
hp-check[5711]: info: :
hp-check[5711]: info: :text
hp-check[5711]: info: :----
hp-check[5711]: info: :Type: Printer
hp-check[5711]: info: :Device URI: hp:/net/Officejet_Pro_8500_A909g?ip=192.168.178.54
hp-check[5711]: info: :PPD: /etc/cups/ppd/text.ppd
hp-check[5711]: info: :PPD Description: HP Officejet Pro 8500 a909g, hpcups 3.10.2
hp-check[5711]: info: :Printer status: Drucker „text“ ist inaktiv; aktiviert seit Mo 29 Mär 2010 22:33:41 CESready to print
hp-check[5711]: info: :Communication status: Good
hp-check[5711]: info: :
hp-check[5711]: info: :
hp-check[5711]: info: :----------------------
hp-check[5711]: info: :| SANE CONFIGURATION |
hp-check[5711]: info: :----------------------
hp-check[5711]: info: :
hp-check[5711]: info: :'hpaio' in '/etc/sane.d/dll.conf'...
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).
hp-check[5711]: info: :
hp-check[5711]: info: :Checking output of 'scanimage -L'...
hp-check[5711]: info: :device `hpaio:/net/Officejet_Pro_8500_A909g?ip=192.168.178.54' is a Hewlett-Packard Officejet_Pro_8500_A909g all-in-one

hp-check[5711]: info: :
hp-check[5711]: info: :---------------------
hp-check[5711]: info: :| PYTHON EXTENSIONS |
hp-check[5711]: info: :---------------------
hp-check[5711]: info: :
hp-check[5711]: info: :Checking 'cupsext' CUPS extension...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking 'pcardext' Photocard extension...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking 'hpmudext' I/O extension...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :Checking 'scanext' SANE scanning extension...
hp-check[5711]: info: :OK, found.
hp-check[5711]: info: :
hp-check[5711]: info: :
hp-check[5711]: info: :
hp-check[5711]: info: :---------------
hp-check[5711]: info: :| USER GROUPS |
hp-check[5711]: info: :---------------
hp-check[5711]: info: :
hp-check[5711]: info: :florian

hp-check[5711]: info: :
hp-check[5711]: info: :-----------
hp-check[5711]: info: :| SUMMARY |
hp-check[5711]: info: :-----------
hp-check[5711]: info: :
error: 7 errors and/or warnings.
hp-check[5711]: info: :
hp-check[5711]: info: :Summary of needed commands to run to satisfy missing dependencies:
hp-check[5711]: info: :su -c "yum -y -d 10 -e 1 install cups-devel"
hp-check[5711]: info: :su -c "yum -y -d 10 -e 1 install cups-devel"
hp-check[5711]: info: :su -c "yum -y -d 10 -e 1 install net-snmp-devel"
hp-check[5711]: info: :
hp-check[5711]: info: :Please refer to the installation instructions at:
hp-check[5711]: info: :http://hplip.sourceforge.net/install/index.html

hp-check[5711]: info: :
hp-check[5711]: info: :Done.