Change log for freedombox-setup package in Debian
1 → 24 of 24 results | First • Previous • Next • Last |
freedombox-setup (0.13.1) unstable; urgency=medium [ Sunil Mohan Adapa ] * debian: Depend on freedombox later than 0.46.0 -- James Valleroy <email address hidden> Fri, 04 Jan 2019 23:23:00 -0500
Available diffs
- diff from 0.13 to 0.13.1 (544 bytes)
freedombox-setup (0.13) unstable; urgency=medium [ Sunil Mohan Adapa ] * Run wrap-and-sort * Depend on freedombox instead of plinth * Update description to call this a transitional package * Move preseed file to Plinth * Depend on plinth later than 0.45.0 * Move motd message to Plinth * Remove explicit configuration of motd message * Don't set IPv6 forwarding to 1 * Move sudoers configuration to plinth * Remove configuring etckeeper during installation * Drop support enabling userdir apache2 module * Remove support for upgrading from php5 * Remove reference to first-run-enable flag files * Move all dependencies to plinth -- James Valleroy <email address hidden> Mon, 31 Dec 2018 17:13:23 -0500
Available diffs
- diff from 0.12 to 0.13 (3.7 KiB)
freedombox-setup (0.12) unstable; urgency=medium [ Q.-A. Nick ] * Update control to remove how-can-i-help dependency [ James Valleroy ] * Explicitly select source format * Bump Standards-Version * Use https URL for copyright format * Update Vcs URLs to Salsa * Rework and expand description -- James Valleroy <email address hidden> Tue, 13 Feb 2018 05:45:53 -0500
Available diffs
- diff from 0.11 to 0.12 (1.1 KiB)
freedombox-setup (0.11) unstable; urgency=high [ James Valleroy ] * Disable systemd pager for CI test. * Bump standards version to 4.1.1. * Remove depends that are also plinth depends (Closes: #877955). * Add myself to uploaders. * Set high urgency because plinth 0.15.3+ds-1 breaks older versions of freedombox-setup. [ Sunil Mohan Adapa ] * Cleanup setup steps based on Plinth changes (Closes: #873946): + Remove SSH and Apache setup moved to Plinth. + Remove initial configuration of network devices. + Remove first-run completely and avoid rebooting. + Remove etckeeper. + Remove providing source. + Remove setup step. + Move Apache FreedomBox configuration to Plinth. + Move Avahi configuration to Plinth. * There is now no need to run setup anymore (Closes: #834260). -- James Valleroy <email address hidden> Sat, 21 Oct 2017 17:22:18 -0400
Available diffs
freedombox-setup (0.10) unstable; urgency=medium [ Petter Reinholdtsen ] * Drop obsolete build dependencies needed to build documentation. [ Sunil Mohan Adapa ] * Exit with error code when a component fails (Closes: #835632). * Cleanup dependencies that are dependencies of plinth, or otherwise no longer needed (Closes: #837335). [ Federico Ceratto ] * Update VCS url. [ James Valleroy ] * Drop obsolete package net-tools dependency (Closes: #849413). -- Federico Ceratto <email address hidden> Sat, 14 Jan 2017 15:59:14 +0000
Available diffs
- diff from 0.9.3 to 0.10 (2.0 KiB)
freedombox-setup (0.9.3) unstable; urgency=medium * Change maintainer to the FreedomBox packaging team. * Make removing policy-rc.d more robust (Closes: #803898). -- Petter Reinholdtsen <email address hidden> Sat, 27 Aug 2016 20:30:40 +0200
Available diffs
- diff from 0.9.2 to 0.9.3 (1.0 KiB)
freedombox-setup (0.9.2) unstable; urgency=medium [ Sunil Mohan Adapa ] * Require libapache2-mod-gnutls >= 0.7.4-1 to include fix for #514005 (Closes: #824370). * Remove flash-kernel code specific for beaglebone (Closes: #825677). * Move LDAP server setup and PAM configuration over to Plinth (Closes: #824641). * Enable userdir for users upgrading from 0.9.1 (#825321). * Don't set laptop mode (Closes: #826345). [ James Valleroy ] * Remove flash-kernel script and corresponding machine-detect script (Closes: #825875). * Require plinth >> 0.9.2 to include LDAP setup and PAM configs. * Remove script that creates access point for Dreamplug (Closes: #825939). * Enable userdir mod during apache setup (Closes: #825321). -- Federico Ceratto <email address hidden> Fri, 17 Jun 2016 23:32:56 +0100
freedombox-setup (0.9.1) unstable; urgency=medium [ James Vallery ] * Migrate from php5 to php7.0 (Closes: #821484). [ Sunil Mohan Adapa ] * When upgrading from < 0.9 enable php7. -- Federico Ceratto <email address hidden> Sun, 15 May 2016 12:25:33 +0100
freedombox-setup (0.9) unstable; urgency=medium [ James Valleroy ] * Fix Wi-Fi AP setup. Patch from Daniel Gnoutcheff. * Allow console access to 'sudo' group users (Closes: #807725). * Print important notes after finishing setup (Closes: #803897). -- Federico Ceratto <email address hidden> Sat, 02 Apr 2016 18:12:56 +0100
freedombox-setup (0.8) unstable; urgency=medium * Adjust autopkgtest script to set HOME, to make sure freedombox-setup is installable. * Only run 'git config --global' in postinst when $HOME is set, otherwise git fail. -- Petter Reinholdtsen <email address hidden> Tue, 19 Jan 2016 23:17:51 +0000
Available diffs
- diff from 0.7 to 0.8 (8.6 KiB)
freedombox-setup (0.7) unstable; urgency=low [ James Valleroy ] * Move hardware setup outside to freedom-maker (Closes: #803734). * Update preseed file for stretch (Closes: #806181). [ Sunil Mohan Adapa ] * Remove LXC (Closes: #806184). * Update Debian CI test case to fix failing tests (Closes: #806597). * Consider wireless when configuring wired ifaces. -- Federico Ceratto <email address hidden> Sat, 12 Dec 2015 21:56:35 +0000
Available diffs
- diff from 0.6 to 0.7 (9.3 KiB)
freedombox-setup (0.6) unstable; urgency=medium [ Nick Daly ] * Upload 0.6 release. [ James Valleroy ] * Fix error preventing flash-kernel install on Dreamplug (Closes: #794825). * Fix some errors in flash-kernel script (Closes: #798417). * Switch from mod_ssl to mod_gnutls (Closes: #798415). * Remove old manual in favor of new one present in Plinth. * Bump dependency on plinth to >= 0.6. [ Sunil Mohan Adapa ] * Use httpredir.debian.org instead of http.debian.net (Closes: #795737). * Remove Tor setup, now handled by Plinth (Closes: #795750). * Remove diagnostic testsuite, now handled by Plinth (Closes: #795768). * Remove unused and not-working code (Closes: #796860). * Support Raspberry Pi 2 (Closes: #797007). * Add login greeter message with location of manuals (Closes: #794826). * Remove unneeded changes to fstab, hosts, and apt sources (Closes: #797377). * Don't remove SSH keys; this will be done by freedom-maker for pre-built images (Closes: #797376). * Default to not downloading sources (Closes: #795764). * Remove apache2-mpm-worker from depends list (Closes: #791597). * Select Apache MPM prefork by default. Disable other MPMs. * Merge Wi-Fi configuration with network configuration (Closes: #797373). * Install avahi service files properly (Closes: #795880). * Move Apache, PAM, sudoers configurations to files. * Move sysctl configuration and LXC template to new hierarchy. * Move machine-detect file to /usr/lib/freedombox. * Add Lintian override for Apache configuration name. * Enable PHP5 and CGI modules by default to avoid restarting Apache2 later. -- Nick Daly <email address hidden> Fri, 16 Oct 2015 16:24:12 -0500
Available diffs
- diff from 0.5 to 0.6 (25.8 KiB)
freedombox-setup (0.5) unstable; urgency=medium [ Nick Daly ] * Upload 0.5 release. [ Sunil Mohan Adapa ] * Migrate to dh_python3 from python-support (Closes: #786164). * Use nmcli to setup network connections (Closes: #786689). * Remove jwchat/ejabber setup as it is handle by Plinth (Closes: #787025). * Remove LDAP root password and create ou=groups (Closes: #787128). * Remove renaming of network interaces as it does not work. Start using systemd's new predictable naming. Don't alter /etc/network/interface anymore. (Closes: #789441). * Use network manager for configuring DNS and DHCP servers. [ James Valleroy ] * Apply patch from Sunil to fix hang issue when building Raspberry Pi images. * Remove privoxy setup as it happens in Plinth now (Closes: #791704). * Configure PAM for LDAP user logins (Close: #792233). -- Nick Daly <email address hidden> Thu, 06 Aug 2015 06:40:43 -0500
Available diffs
- diff from 0.3 to 0.5 (10.7 KiB)
Deleted in experimental-release (Reason: None provided.) |
freedombox-setup (0.4) experimental; urgency=low [ Nick Daly ] * Uploading new release. * Made lintian clean(er). [ James Valleroy ] * Stop ejabberd service before removing it's cert file during first-run. * Configure macchanger so it doesn't run automatically when the interface is brought up. We will run it manually if an interface has a null MAC during first-run. * Update dnsmasq upstream to eth0, since that is the upstream interface now. * Update jwchat test to check /jwchat URL. * Setup uap0 interface on dreamplug, using hostapd to configure wifi AP. * Enable dhcp on wlan network. * Create uap0 interface before starting tor. * Bring up uap0 during first-run. This allows interface-detect to see it. * Set HOME in first-run initscript so etckeeper can find the git config. * Beaglebone: Don't need to copy u-boot files to boot partition. freedom-maker will install it in front of boot partition. * Don't skip flash-kernel on beaglebone (reverts previous change). It doesn't cause issues now since we are using ext2 for boot parition. [ peacekeeper ] * Add initial support for cubietruck. * Add rtc_sunxi as boot module. [ Sunil Mohan Adapa ] * Remove pagekite recommendation as Plinth now takes care of its installation and setup (Closes: #778310). * Don't indiscriminately allow all proxy targets in jwchat configuration. * Redirect to Plinth from home page instead of showing jwchat (Closes: #772919). [ James Valleroy ] * Replace cdn.debian.net with http.debian.net in LXC template (Closes: #774479). -- Nick Daly <email address hidden> Sun, 14 Jun 2015 20:35:03 -0500
freedombox-setup (0.3) unstable; urgency=low [ Petter Reinholdtsen ] * Adjust debian/tests/test-chroot to build using unstable instead of testing. We are focusing on unstable for now. * Update Standards-Version from 3.9.5 to 3.9.6. [ James Valleroy ] * Remove changes to old ejabberd config file. New ejabberd package uses yml config. * Enable scramblesuit plugin for obfsproxy in tor. Enable ExtORPort for local communication between tor and obfsproxy. * Fix typo in Dreamplug wifi setup script. * Add netcat dependency for tor-get-orport. * Fixes to Tor configuration: - Move DNSPort to 9053 so it does not interfere with dnsmasq. - For configured interfaces, only add SocksPort to interfaces with static IPs. * Fix beaglebone setup to handle btrfs. [ Sunil Mohan Adapa ] * Cleanup Plinth's Apache configuration. Default SSL site is no longer hijacked. Plinth supplied configuration is good enough don't interfere (Closes: #769878). -- Petter Reinholdtsen <email address hidden> Sat, 06 Dec 2014 10:56:59 +0100
Available diffs
- diff from 0.2 to 0.3 (4.3 KiB)
freedombox-setup (0.2) unstable; urgency=low * Updated documentation from the wiki. * Adjust test suite to use localhost as hostname if no /etc/hostname exist in the test environment. * Change Vcs-Browser field to the cgit interface. -- Petter Reinholdtsen <email address hidden> Fri, 29 Aug 2014 23:20:48 +0200
Available diffs
- diff from 0.0.49 to 0.2 (6.4 KiB)
freedombox-setup (0.1) unstable; urgency=high [ James Valleroy ] * Fix typos in first-run.d and setup.d scripts. Remove unused function. [ Petter Reinholdtsen ] * Correct DEBIAN_FRONTEND setting in testsuite to only use lower case letters in value. * Only insert /home/fbx/README in setup.d/45_user-doc if /home/fbx exist. * Make sure /etc/hostname exist in testsuite chroot. * Disable shell tracing in testsuite script now that it is working. -- Petter Reinholdtsen <email address hidden> Mon, 25 Aug 2014 08:15:52 +0200
freedombox-setup (0.0.49) unstable; urgency=medium [ James Valleroy ] * Fix wrong quote character in setup.d/99_provide-source (Closes: #756529). * Clean up beaglebone related code. * Adjust Tor setup to enable it as a transparent proxy. [ Petter Reinholdtsen ] * Change test-chroot to use SOURCE=false to avoid trying to download the source packages when testing. * Adjust test-chroot to use DEBIAN_FRONTEND=Noninteractive, as no tty is available when testing. -- Petter Reinholdtsen <email address hidden> Sun, 03 Aug 2014 11:46:38 +0200
Available diffs
- diff from 0.0.48 to 0.0.49 (2.9 KiB)
freedombox-setup (0.0.48) unstable; urgency=medium * Depend on libpam-tmpdir to separate user temporary files by default. * Depend on libpam-abl to make brute force login attacks harder by default. * Update documentation from wiki. * Explain in setup.d/99_provide-source that source is added when it is done. * Add autopkgtest check running the setup script. * Move monkeysphere from depends to suggests while we wait for a solution for bug #635711. -- Petter Reinholdtsen <email address hidden> Mon, 28 Jul 2014 20:42:05 +0200
Available diffs
- diff from 0.0.47 to 0.0.48 (3.0 KiB)
freedombox-setup (0.0.47) unstable; urgency=low [ Nick Daly ] * Tee rpi-update output to the build log. * Rename NOSOURCE variable to SOURCE. * Remove IPv6 configuration from networking auto-config, as network setup seem to choke on it. -- Petter Reinholdtsen <email address hidden> Sat, 14 Jun 2014 08:08:34 +0200
Available diffs
- diff from 0.0.46 to 0.0.47 (1.4 KiB)
freedombox-setup (0.0.46) unstable; urgency=medium [ James Valleroy ] * Add support for Beaglebone using the linux-image-armmp kernel in Debian. * Adjust serial port setup to handle both Dreamplug and Beaglebone. -- Petter Reinholdtsen <email address hidden> Fri, 16 May 2014 22:24:50 +0200
Available diffs
- diff from 0.0.45 to 0.0.46 (1.4 KiB)
freedombox-setup (0.0.45) unstable; urgency=low [ Petter Reinholdtsen ] * Depend on firewalld to block all access by default, and require active involvement to open a port. This require an updated plinth package. * Depend on how-can-i-help to let every user of apt know about problems with 'our' packages. [ James Valleroy ] * Add IPv6 support to network interfaces, privoxy, ejabberd. * Add apache conf for jwchat, separate from fbx site conf. * Add initial support for the Beagle Bone. * Skip backup in rpi-update to avoid error caused by recent change in rpi-update triggering error when no kernel is installed when rpi-update is executed the first time. [ Sunil Mohan Adapa ] * Remove freedombox-client-proxy script, as all the iptables rules are now handled by the plinth package. Depend on plinth (>= 0.3.2.0.git.20140504-1) to get a version with these rules. [ Petter Reinholdtsen ] * Disable downloading of non-Debian packages for the Beagle Bone. We want to use Debian packages for this. * Remove now obsolete init.d scripts /etc/init.d/proxy and /etc/init.d/freedombox-client-proxy on upgrades. * Add curl as binary dependency, as rpi-update switched from wget to curl a month ago. in commit dd495b8dd7f36dc411f2ed2bbdc21e4062b01a62. -- Petter Reinholdtsen <email address hidden> Sun, 04 May 2014 09:59:58 +0200
Available diffs
- diff from 0.0.44 to 0.0.45 (4.4 KiB)
freedombox-setup (0.0.44) unstable; urgency=low * Update Standards-Version from 3.9.4 to 3.9.5. No changes needed. * Add dependency on unattended-upgrades to make it easier to handle upgrades. * Rename init.d scripts first-run to freedombox-first-run and proxy to freedombox-client-proxy, to make it easier to see in /etc/init.d/ which scripts belong to the freedombox setup. * Adjust freedombox-first-run boot dependencies to run after firewalld, tor, haveged, lxc and pagekite, in case those are needed to set up the system. * Rename interface_detect to interface-detect, for more consistent naming with the other sbin tools in this package. * Rename setup.d/10_dreamplug to setup.d/10_hardware to better reflect its current task. * Drop checkinstall from dependencies. It is not used, as far as I can tell. * Drop lua-sec, python-augeas, python-beautifulsoup, python-bjsonrpc, python-docutils and python-lxml from dependencies. None of them are used, as far as I can tell, and they are libraries that should be pulled in by packages that need them. * Drop python-argparse from dependencies, it is now a virtal package provided by libpython2.7-stdlib. * Add dblatex, w3m and zip as build dependencies for the new documentation setup to get the package building automatically (Closes: #745539). -- Petter Reinholdtsen <email address hidden> Tue, 22 Apr 2014 20:56:00 +0200
freedombox-setup (0.0.43) unstable; urgency=low * Add Sunil Mohan Adapa as uploader. * Correct copyright info for lxc-templates/lxc-debian-freedombox, it is LGPL 2.1+, not GPL2+. -- Petter Reinholdtsen <email address hidden> Tue, 15 Apr 2014 14:21:48 +0200
1 → 24 of 24 results | First • Previous • Next • Last |