Debian
bridge-utils package

Change log for bridge-utils package in Debian

1 → 28 of 28 results First • Previous • Next • Last
Published in sid-release 
bridge-utils (1.7.1-2) unstable; urgency=low

  [ Debian Janitor ]
  * Trim trailing whitespace.
  * Update standards version to 4.6.2, no changes needed.

  [ Chris Hofstaedtler ]
  * Install files into /usr instead of /. (Closes: #1059394)

 -- Santiago García Mantiñán <email address hidden>  Fri, 01 Mar 2024 23:09:33 +0100
Published in bookworm-release
Superseded in sid-release 
bridge-utils (1.7.1-1) unstable; urgency=low

  * New upstream version.
    Only some fixes for compilation warnings and the man page.
  * Update standards version to 4.6.1, no changes needed.
  * Set debhelper-compat version in Build-Depends.
  * Trim trailing whitespace.

 -- Santiago García Mantiñán <email address hidden>  Wed, 25 Jan 2023 22:11:52 +0100
Superseded in sid-release 
bridge-utils (1.7-2) unstable; urgency=medium

  * Add BRIDGE_DISABLE_LINKLOCAL_IPV6_ALSO_PHYS to /etc/default/bridge-utils
    to stop disabling IPv6 on physical interfaces of vlan ports if set to no. 
    Closes: #989162.
  * Update interfaces man page, IPv6 works with STP on after DAD was fixed.
    Closes: #980507.
  * Treat vlan ports the same as ifupdown, avoid octal vlans. Closes: #995627.
  * Update NEWS file to fix us blaming the kernel for the MAC address
    selection that is really overridden by systemd.

 -- Santiago García Mantiñán <email address hidden>  Mon, 03 Oct 2022 23:11:46 +0200
Published in bullseye-release
Superseded in sid-release 
bridge-utils (1.7-1) unstable; urgency=medium

  * New upstream version.
    Only messages related changes and compilation fixes.
  * Remove preserve_gcc_flags patch (in upstream now).
  * Bump standards, no change needed.
  * Clarify portprio and fix example.
  * Update upstream url.
  * Fix NEWS versioning of last entry :-?

 -- Santiago Garcia Mantinan <email address hidden>  Wed, 24 Feb 2021 12:34:03 +0100
Superseded in sid-release 
bridge-utils (1.6-6) unstable; urgency=medium

  * Fix IPv6 address getting assigned on hotplug devices.
    Closes: #980752.
  * Fix waiting so that DAD works again. Closes: #982943.
  * Move mac setting before brctl addif to ensure mac setting.
    Closes: #980856.
  * Update documentation and add examples. Closes: #765098.
  * Update manpages. Closes: #981253.
  * Add a note on MTU settings. Closes: #292088.
  * Hook also on down to recreate the bridge so that multiple
    stanzas work Ok on ifdown. Closes: #319832.

 -- Santiago Garcia Mantinan <email address hidden>  Tue, 16 Feb 2021 13:29:04 +0100
Superseded in sid-release 
bridge-utils (1.6-5) unstable; urgency=low

  * Overload bridge_hw to allow do specify an interface as well as the
    MAC address. Closes: #966244.
  * Change man page for bridge-utils-interfaces and news fileto document
    this overloading.

 -- Santiago Garcia Mantinan <email address hidden>  Fri, 22 Jan 2021 11:08:47 +0100
Superseded in sid-release 
bridge-utils (1.6-4) unstable; urgency=low

  * Add en* to the device regex so that all catches them. Closes: #966319.
  * Document MAC address changes on news. Closes: #980505.

 -- Santiago Garcia Mantinan <email address hidden>  Thu, 21 Jan 2021 10:51:31 +0100
Superseded in sid-release 
bridge-utils (1.6-3) unstable; urgency=medium

  * Support VLAN aware setups where we need vlan filtering.
    Thanks Benedikt Spranger for the patch. Closes: #950879.
  * Clarify on manual page that stp will get IPv6 lost. Closes: #736336.
  * Add a 1 second sleep if hw address needs to be changed. Closes: #945466.

 -- Santiago Garcia Mantinan <email address hidden>  Thu, 30 Apr 2020 10:06:38 +0200
Published in buster-release
Superseded in sid-release 
bridge-utils (1.6-2) unstable; urgency=medium

  * Bump Standards-Version.
  * Preserve gcc flags set when building the lib.

 -- Santiago Garcia Mantinan <email address hidden>  Mon, 28 Jan 2019 00:25:14 +0100
Superseded in buster-release
Superseded in sid-release 
bridge-utils (1.6-1) unstable; urgency=low

  * New upstream version.
  * Change default back to not hotplug. Closes: #892277.
  * Allow mtu to be set on the bridge by propagating it to the bridged
    interfaces. Closes: #661711.
  * Remove kernel headers from the package.

 -- Santiago Garcia Mantinan <email address hidden>  Tue, 15 Jan 2019 13:18:33 +0100
Superseded in buster-release
Superseded in sid-release 
bridge-utils (1.5-16) unstable; urgency=medium

  * Don't set dev globally at bridge-utils.sh. Closes: #873086.

 -- Santiago Garcia Mantinan <email address hidden>  Sun, 08 Apr 2018 23:06:30 +0200
Superseded in buster-release
Superseded in sid-release 
bridge-utils (1.5-15) unstable; urgency=medium

  * Fix substrings on interfaces. Closes: #873087.
  * Make it lintian clean sticking to 1.0 source format for now.
    No time to properly comment all the patches right now.

 -- Santiago Garcia Mantinan <email address hidden>  Fri, 02 Mar 2018 22:08:20 +0100
Published in stretch-release 
bridge-utils (1.5-13+deb9u1) stretch; urgency=low

  * Fix a problem with some vlan interfaces not being created.
    Closes: #866687.

 -- Santiago Garcia Mantinan <email address hidden>  Sun, 02 Jul 2017 23:20:04 +0200
Superseded in buster-release
Superseded in sid-release 
bridge-utils (1.5-14) unstable; urgency=low

  * Fix a problem with some vlan interfaces not being created.

 -- Santiago Garcia Mantinan <email address hidden>  Mon, 26 Jun 2017 17:48:37 +0200
Superseded in stretch-release
Superseded in sid-release 
bridge-utils (1.5-13) unstable; urgency=low

  * Fix a hardcoded interface name on bridge-utils.sh. Closes: #854841.

 -- Santiago Garcia Mantinan <email address hidden>  Sat, 11 Feb 2017 00:16:45 +0100
Superseded in stretch-release
Superseded in sid-release 
bridge-utils (1.5-12) unstable; urgency=medium

  * Add vlan support so that old setups using vlans as ports don't break.

 -- Santiago Garcia Mantinan <email address hidden>  Sun, 22 Jan 2017 00:23:50 +0100
Superseded in stretch-release
Superseded in sid-release 
bridge-utils (1.5-11) unstable; urgency=low

  * Change /etc/default/bridge-utils to enable addition of hotplugged
    interfaces.
  * Integration with the vlan package is causing problems, we have
    removed it and rely on ifupdown implementing it. Closes: #818849.

 -- Santiago Garcia Mantinan <email address hidden>  Wed, 14 Dec 2016 23:26:05 +0100
Superseded in stretch-release
Superseded in sid-release 
bridge-utils (1.5-10) unstable; urgency=low

  * Fix wait when bridge is ready. Thanks Alexander. Closes: #779348.
  * Added some documentation on the README.Debian file to comment some
    config bugs. Closes: #765000, #815927.
  * Clarify pre-up commands changing an example on the man page for
    bridge-utils-interfaces. Closes: #783956.

 -- Santiago Garcia Mantinan <email address hidden>  Thu, 10 Nov 2016 22:23:49 +0100
Superseded in stretch-release
Published in jessie-release
Superseded in sid-release 
bridge-utils (1.5-9) unstable; urgency=low


  * Fix kernel version check and adjust it to match kernel behaviours.
    Closes: #725786.

 -- Santiago Garcia Mantinan <email address hidden>  Tue, 20 May 2014 23:01:06 +0200
Superseded in jessie-release
Superseded in sid-release 
bridge-utils (1.5-8) unstable; urgency=low


  * Change the way to set the hardware address (MAC) of the bridge,
    don't set it on the ports, set it on the bridge instead if the kernel
    is quite recent (version where it started to work is unknown, we need
    to find this). This needs testing and relates to #725786.
  * Change Architecture to linux-any. Closes: #745164.
  * Apply Colin's patch to fix cross-build, thanks. Closes: #734873.

 -- Santiago Garcia Mantinan <email address hidden>  Sat, 07 Dec 2013 18:55:13 +0100
Superseded in jessie-release
Superseded in sid-release 
bridge-utils (1.5-7) unstable; urgency=low


  * The scripts now use iproute instead of ifconfig. Closes: #698630.
  * Avoid clearing the IP (set it to 0.0.0.0) of the attached ports.
  * Set forward delay after stp (3.11 sets fd on stp). Closes: #729118.

 -- Santiago Garcia Mantinan <email address hidden>  Fri, 8 Nov 2013 09:55:25 +0100
Superseded in jessie-release
Published in wheezy-release
Superseded in sid-release 
bridge-utils (1.5-6) unstable; urgency=low


  * Will rewrite post wheezy, changing to suggests. Closes: #693095.
  * Applied patch to fix man typo. Closes: #683710.

 -- Santiago Garcia Mantinan <email address hidden>  Wed, 14 Nov 2012 10:39:43 +0100
Superseded in sid-release 
bridge-utils (1.5-5) unstable; urgency=low


  * Set Multi-Arch: foreign. Closes: #689144.
  * Add a depends on net-tools. Closes: #688677.

 -- Santiago Garcia Mantinan <email address hidden>  Thu, 08 Nov 2012 19:56:15 +0100
Superseded in wheezy-release
Superseded in sid-release 
bridge-utils (1.5-4) unstable; urgency=low


  * Remove mkdir and exit if /run/network doesn't exist. Thanks
    to Andrew Shadura. Closes: #676183.
  * Allow hotplug of ports to be user configurable and default
    to disable. Closes: #673490.

 -- Santiago Garcia Mantinan <email address hidden>  Fri, 29 Jun 2012 10:56:51 +0200

Available diffs

Superseded in wheezy-release
Superseded in sid-release 
bridge-utils (1.5-3) unstable; urgency=low


  * First version targetting Wheezy.
  * Lintian cleans including complying with hardening, ...
  * Enable ipv6 on ports when taking bridge interface down. Thanks to
    David Fries for the bug and patch. Closes: #651652.
  * Now that #568479 is gone we can hopefully sync with Ubuntu:
    Include the new Steve's udev rule to allow attaching hotplug devices.
    Extend the definition of 'bridge_ports all' to support biosdevname.
    Thanks to Steve Langasek for his help. Closes: #626152.

 -- Santiago Garcia Mantinan <email address hidden>  Mon, 09 May 2011 19:02:48 +0200
Superseded in wheezy-release
Superseded in sid-release 
bridge-utils (1.5-2) unstable; urgency=low
  * Include Ubuntu's patch to factor out parsing of bridge_ports into    a reusable shell library. -- Santiago Garcia Mantinan <email address hidden>  Tue, 03 May 2011 19:35:38 +0200
Superseded in wheezy-release
Superseded in sid-release 
bridge-utils (1.5-1) unstable; urgency=low
  * New upstream version. Closes: #611761.  * Relocate ifupdown.sh to /lib/bridge-utils and brctl to /sbin.    Closes: #569350.  * Removed SMPNOTES, upstream updated FIREWALL. Closes: #518649.  * Removed the 30 seconds wait. Closes: #549696.  * Only suggest ifupdown. Closes: #595115.  * Remove the versioning from the description. Closes: #595116.  * Disable ipv6 on the interfaces of the bridge. Closes: #607741.  * On newer kernels we wait only till we forward. Closes: #549696.  * Use sleep 0.1 (0.01 was too much), thanks Mikhail. Closes: #572835.  * Set ret to -1 on errno to avoid returning 0. Closes: #574363.  * Fix manpage setageing explanation. Closes: #523141.  * Make it lintian clean again. -- Santiago Garcia Mantinan <email address hidden>  Tue, 19 Apr 2011 19:45:51 +0200
Superseded in wheezy-release
Published in squeeze-release
Superseded in sid-release
Published in lenny-release 
bridge-utils (1.4-5) unstable; urgency=low


  * Try to fix the lack of bridge/ on the sysfs paths. Closes: 496491.
  * Add a comment on the bridge-utils-interfaces manpage about the
    misusage of stanzas for the bridge ports in the interfaces file.
    Closes: #488313.

 -- Santiago Garcia Mantinan <email address hidden>  Wed, 27 Aug 2008 21:21:41 +0200
1 → 28 of 28 results First • Previous • Next • Last