Changelog
altos (1.9.8-1) unstable; urgency=medium
[ Keith Packard ]
* altosdroid: Work without GPS available
* altosuilib: Remove spurious message about libaltos
* kernel: Widen pyro time values to 32 bits
* doc: telemini force freq is pin 6, not 7
* altosdroid: Show altitude as well as height
* libaltos: Use cross compilers to build libaltos for i686, amd64, aarch64, armel and armhf
* ao-bringup: Revert EasyMini scripts to 1.0
* altos: Fixes for GCC 10 (-fno-common is default)
* ao-test-igniter: Also test ADC voltage for in-range of 1-4 volts
* ao-bringup: Use ao-test-igniter voltage check feature in pyro tests
* altos: Add preliminary TeleMega v5.0 bits
* altos: Add MMC5983 driver
* altos: Change MMC5893 driver to avoid interrupts
* libaltos: Add new microchip MAC address to bluetooth map
* micropeak: Show error message if USB adapter open fails
* altos: Prepare for picolibc stdio change
* telemega-v5.0: Add Makefiles
* Show mag sensor SPI ID
* altos: Fix telemega v5.0 CS_FLASH pin
* altos: Record MPU6000 failure but let device boot
* altos/stm: Use picolibc startup code
* altos: Add bit-bang i2c driver
* altos: Get MMC5983 driver working
* altos/stm: Minor cleanups in ao_arch_funcs.h
* altos/telemega-v5.0: Fix config for MMC5983
* altos: Detect CC120X device type
* altos: Support normalized axes in mpu6000 and mmc5983
* altos: Allow devices to override default beep
* altos: Support normalized log
* altos: Add normalized telemetry support
* altos: Update telemega-v5.0 config
* altoslib: Support TeleMega v5.0
* altosui: Add options for low frequency beeper
* altos: Fix up HAS_FLIGHT_DEBUG
* altos: Allow beep tone spacing to be changed
* altos/telemega-v5.0: Space tones closer together
* altos: Build TeleMega v5.0 bits
* Add TeleMega v5.0 firmware
* altosdroid: Add tilt angle to pad and flight tabs
* libaltos: Update windows DLLs
* Bump version to 1.9.7.1
* altos: Deal with cc1201 limitations
* altos: All beep-enabled boards have beep config
* Add test-easymini-v1.0 script
* altoslib: Document how to add a new product
* libaltos: Ignore cjnitest files for all targets
* doc: Note pyro channel time limits on <1.9.8 firmware
* doc: Add specs for TeleMega v5.0
* doc: Update for 1.9.8
* Version 1.9.8
[ Bdale Garbee ]
* doc: add mounting hole spacing information to product outlines
* debian: add --disable-multi-arch to configure
* update ChangeLog for 1.9.8 release
-- Keith Packard <email address hidden> Mon, 20 Sep 2021 21:30:49 -0600
