Changelog
altos (1.9.13-1) unstable; urgency=medium
[ Keith Packard ]
* altos: Switch LED pin number to 8 bits
* altos: Use -ffunction-sections -fdata-sections
* altos: Add SAMD21 bits
* altos: Add sample samd21 application for snekboard
* ao-tools: Add ao-flash-samd21 script
* altos/samd21: Add register definitions
* altos/samd21: Get USB driver working in AltOS
* altos/samd21: Automatically erase flash when writing
* altos/snekboard: Indicate that USB is used for stdio
* altos: Switch LED pin number to 8 bits
* altos: Use --gc-sections
* altos: Add SAMD21 bits
* altos: Add sample samd21 application for snekboard
* ao-tools: Add ao-flash-samd21 script
* altos/samd21: Add register definitions
* altos/samd21: Get USB driver working in AltOS
* altos/samd21: Automatically erase flash when writing
* altos/snekboard: Indicate that USB is used for stdio
* Add option to beep max height in feet rather than just meters
* altos: Get SAMD21 SPI driver working in non-DMA mode
* snekboard: Add samd21 SPI test function
* This is what I'm using locally for flashing samd21 parts
* samd21: Configure ROM/RAM values per device and provide linker scripts for each
* altos: Add metro-m0 port for SAMD21G18 testing
* samd21: Fix up DMA driver
* samd21: Avoid divides in boot loader
* samd21: Fix value defines to be unsigned long
* samd21: Use DMA for SPI send
* snekboard: Need DMA for SPI now.
* samd21: Macro-ize the DMA register settings a bit
* samd21: Add ability to use arbitrary pin configs with SPI
* metro-m0: Configure on-board SPI flash part
* altos/ms5607: Use ao_gpio_set instead of stm_gpio_set
* samd21: Get ADC code compiling
* samd21: Add SPI configurations used by TM v4.0
* samd21: Get serial driver building
* altos/telemetrum-v4.0: Almost building
* samd21: Shrink default stack to 512 bytes
* samd21: Stub out exti code
* samd21: Stub out beep code
* altos/telemetrum-v4.0: It links
* samd21: Wire up pin interrupts
* metro-m0: Demo pin interrupts
* samd21: Get beep code working
* samd21: Move DMA channel defs to ao_dma_samd21.h
* samd21: Hook up AltOS timer functionality
* samd21: Hook up AltOS style ADC
* metro-m0: Hook up ADC sample from A pins
* telemetrum-v4.0: Add beeper and fix ADC defs
* telemetrum-v4.0: Remove unused file
* drivers/ublox: Clean up some debug mode code
* samd21: Leave serial RX interrupts enabled
* metro-m0: Add GPS support
* telemetrum-v4.0: Set USE_SERIAL_1_STDIN to 0
* telegps: Copy altosui 'beep feet' bits to telegps
* altos/ms5607: Use duplex for fetching data
* samd21: PA20 maps to SERCOM3.2 not SERCOM3.3
* samd21: Limit SPI baud value to 1
* samd21: Restore pin cfg when exti is disabled
* samd21: AO_SPI_0_PA04_PA05_PA06 is FUNC_D
* fixup for exti restore
* telemetrum-v4.0: MS5607 doesn't share SPI controller
* telemetrum-v4.0: Correct beeper configuration
* altos/cc1200: Simplify interrupt handling
* altos: Avoid modulus in task queue on parts without idiv
* samd21: Save interrupt pin status before enabling interrupts
* attiny, stm32l0: Note that these chips don't support spi duplex
* altos: Add ao_gps_utc_tick
* altos/ms5607: Fixup ms5607 changes for other chips
* altos: Make sure APRS packets are reasonably separated
* altos: Enable telemetrum telemetry for telemetrum v4.0
* altoslib: Handle TeleMetrum v4.0 in idle mode
* Add TeleMetrum v4.0 to release files
* ao-tools/ao-eeprom: Add support for TeleMega v5.0
* altoslib: Add notes about updating ao-eeprom for new product
* altos: Add timeout for MS5607 ADC conversion
* easymotor-v3.0: Use motor pressure to trigger data logging
* easymotor-v3.0: Clean up build bits
* altos/stm: Add ao_spi_put_pins for MS5607 driver
* altos/stmf0: Add ao_spi_put_pins for MS5067 driver
* altos: Add timeout in MS5607 get_sample code
* drivers: Add BMI088 driver
* altos: Add BMI088 test framework using Nucleo32 board for stm32f042
* altos: Add TeleMega v6.0
* doc: Update docs for asciidoctor-pdf version 2.x
* src/drivers: Ignore printf warnings in ao_aprs.c
* drivers: Add AO_LOG_NORMALIZED support to BMI088 command
* altos: Split AO_LOG_NORMALIZED support out in telemetry code
* ao-tools: Fix buffer overflow in lib/ao-hex.c
* ao-tools: Update ao-eeprom for TeleMega v6
* altoslib: Add TeleMega v6 support
* altos/telelco: Add some debug aids for TeleLCO event stuff
* easymotor-v3: Fix pressure to adc conversion to use reference voltage
* altos/easymotor: Move pressure conversion code to ao_motor_flight.c
* altos: Add makefiles for telemega v6
* doc: Add release notes for 1.9.13
* doc: Update copyright year to 2023
* Version 1.9.13
* Disable TM v4.0 firmware for 1.9.13
* doc: Add release notes for 1.9.13
* doc: Update copyright year to 2023
* Version 1.9.13
[ Bdale Garbee ]
* first stab at support for TeleMetrum v4.0
* update Releasing with tweaks made during 1.9.12 release process
* easymini v3.0 production scripts working
* EasyMotor v3 production script working, sans pressure input test
* ao-tools: don't do 'm 0' after 'E 0' since EasyMotor doesn't support it
* update Releasing to include EasyMini v3.0 loader
* ao-tools: new ao-test-pressure utility for bench testing EasyMotor
* ao-bringup: final production test script for EasyMotor v3
* ao-tools: increase robustness of turnon_easymotor
* TeleMetrum v4.0 work in progress
* altosui: force Locale.ROOT during CSV export to avoid commas in decimals
* ao-tools: return ao-flash-lpc operaton to "full speed"
* doc: add a warning to TeleLaunch docs about siren volume levels
* doc: add a link to a reference on ARES/RACES use of PowerPole connectors
* doc: update EasyMotor behavior description for firmware 1.9.13 and later
* doc: update EasyMotor behavior description for firmware 1.9.13 and later
* releasing 1.9.13
-- Bdale Garbee <email address hidden> Thu, 19 Jan 2023 22:59:20 -0700
