lp:yade

Author: Deepak
Author Date: 2024-04-20 21:56:28 UTC

temporarily deactivating pimpleFoamYade

There appears to be a dead-lock when running pimpleFoamYade
and hence the timeout failure in the CI tests, fix is
ongoing.

Author: Chareyre
Author Date: 2024-04-19 16:28:03 UTC

use foamCoupling code from yade repo

Author: Karol Brzezinski
Author Date: 2024-04-08 09:36:38 UTC

Add mask-based interaction selection, and precribing contact area for interactions

Author: Karol Brzezinski
Author Date: 2024-03-25 19:52:31 UTC

Add 'case 0' to the switch handling separation plane, that does nothing - skips switch and moves to the regular test.

Author: Deepak
Author Date: 2024-03-10 15:18:26 UTC

Coupling with openfoam v1906

The FoamCoupling engine now spawns the openfoam solver.
 Some rewrite of the coupling, which uses
a single module for serial & parallel Yade cases.
To fix: unfortunately the case with a single yade process hangs :(

Author: Deepak
Author Date: 2020-01-01 23:35:11 UTC

single module and functions for serial and paralllel case

remove unused/superfluous mpi init function

WIP: fluidized bed example

Author: Anton Gladky
Author Date: 2024-02-09 20:21:23 UTC

Add release file

Author: Karol Brzezinski
Author Date: 2024-02-03 13:15:47 UTC

comment out other unused variables

Author: Bruno Chareyre
Author Date: 2023-12-21 16:58:43 UTC

switch source of doc upload, ubuntu18.04 -> ubuntu22.04

Author: Bruno Chareyre
Author Date: 2023-11-27 15:18:23 UTC

enable negative timestep for time-reversal

Author: Jérôme Duriez
Author Date: 2023-08-28 15:09:15 UTC

A clever estimation of distance for out-of-the-grid points

Author: Jérôme Duriez
Author Date: 2023-07-13 09:25:50 UTC

Some other note that clang-format report is available only in make_minimal

Author: Jérôme Duriez
Author Date: 2023-06-12 08:37:54 UTC

Removing exactAsphericalRot from .py examples and PP doc

Author: Carlos Andrés del Valle
Author Date: 2023-04-24 20:07:07 UTC

remove negative poisson ratio warning

Author: Janek Kozicki
Author Date: 2023-02-06 20:29:48 UTC

add tag "grenoble" (revert this later)

Author: Bruno Chareyre
Author Date: 2023-02-09 17:26:04 UTC

point to 2020Benchmark tag and fix SimulationTime3

Author: Anton Gladky
Author Date: 2023-02-02 05:50:40 UTC

Add release file

Author: Janek Kozicki
Author Date: 2023-01-30 18:26:31 UTC

Add option to python-formatter.sh to allow formatting with uncommitted changes.

Author: Bruno Chareyre
Author Date: 2023-01-26 12:53:23 UTC

fix path of input data

Author: Janek Kozicki
Author Date: 2022-12-17 12:25:01 UTC

Add a FIXME note.

Author: Bruno Chareyre
Author Date: 2022-12-16 14:24:23 UTC

guiTest for alphaShapes

Author: Jérôme Duriez
Author Date: 2022-11-21 13:57:38 UTC

Law2_ScGeom_CapillaryPhys_Capillarity.createDistantMeniscii doc back to its initial version but attribute is no longer necessary for just-touching case

Author: Vasileios Angelidakis
Author Date: 2022-12-06 17:02:26 UTC

Correct example description

Author: Vasileios Angelidakis
Author Date: 2022-12-14 13:11:41 UTC

Allow contacts between fixed potential blocks

Author: Robert Caulk
Author Date: 2022-12-14 11:59:49 UTC

ensure randomColor() uses utils func

Author: Chareyre
Author Date: 2022-11-27 15:40:32 UTC

optionaly, don't refresh interaction radii

Author: Bruno Chareyre
Author Date: 2022-11-07 11:48:47 UTC

compile and improve Law2_ScGeom_CapillaryPhys_Capillarity1.cpp

%{all_commits}

Author: Janek Kozicki
Author Date: 2022-08-26 17:11:06 UTC

Add debian sid

Author: Janek Kozicki
Author Date: 2022-06-29 20:51:41 UTC

create a file with a list of files with DOS line endings

Author: Bruno Chareyre
Author Date: 2022-06-03 14:57:26 UTC

call checkFlipSpheres.py a 'slow' script

Author: Janek Kozicki
Author Date: 2022-06-25 14:50:40 UTC

draft of class AuthorsPublicationsStatus is starting to take shape. Now to compile this.

Author: =?utf-8?b?VsOhY2xhdiDFoG1pbGF1ZXI=?=
Author Date: 2022-06-24 15:50:26 UTC

Starting point for hiding inherited attributes selectively in the doc

Author: Janek Kozicki
Author Date: 2022-06-23 13:36:57 UTC

try to reproduce capillarity CGAL compilation error

Author: Anton Gladky
Author Date: 2022-05-30 13:42:57 UTC

Add CPP-implementation of the clumps-breakage algorithm. Not fully functinoal

Author: Janek Kozicki
Author Date: 2020-12-03 23:59:13 UTC

Add OpenFoam tests for ubuntu 20.04

Author: Chareyre
Author Date: 2022-04-30 20:03:37 UTC

remove -fno-common option

Author: Chareyre
Author Date: 2022-04-23 08:26:01 UTC

fix YADE_PLUGIN again*

Author: Robert Caulk
Author Date: 2022-04-21 13:01:07 UTC

trying various methods for state replacement

Author: Bruno Chareyre
Author Date: 2022-04-20 15:27:13 UTC

needed for workarounds

Author: Janek Kozicki
Author Date: 2022-02-16 19:04:15 UTC

Try new archlinux image in CI

Author: Anton Gladky
Author Date: 2022-01-16 16:23:47 UTC

2022.01a

Author: Janek Kozicki
Author Date: 2022-01-06 13:59:13 UTC

fix typos in comments

Author: Robert Caulk
Author Date: 2021-11-12 14:35:30 UTC

Letting user choose to avoid computing and applying forces, while still solving for pressure field. See discussion [1]

[1]https://answers.launchpad.net/yade/+question/699421

Author: Robert Caulk
Author Date: 2021-11-12 13:30:34 UTC

Turn defTolerance off by default.

This seems like an option that the user should conciously decide to use - I do not like that an MWE has this dynamic mesh control activated by default.

Author: Jérôme Duriez
Author Date: 2021-11-10 14:05:36 UTC

VTK stuff for LevelSet bodies

Author: Anton Gladky
Author Date: 2021-10-28 19:18:40 UTC

Install patched openblas

Author: Janek Kozicki
Author Date: 2021-10-28 12:18:25 UTC

Add tags: newhardware to deb_bookworm

Author: Robert Caulk
Author Date: 2021-10-21 13:09:36 UTC

Update pkg/pfv/Thermal.cpp

Author: Bruno Chareyre
Author Date: 2021-09-28 13:43:01 UTC

remove debug message

Author: Anton Gladky
Author Date: 2021-09-27 08:28:31 UTC

Disable checkMPISilo.py.

Needs to be investigated on Debian-Bookworm

Author: Raphaël Maurin
Author Date: 2021-09-09 23:23:42 UTC

HydroForceEngine examples: update the examples and add new ones
- update all the examples to take into account the latest changes in the source code
- add the full framework developed by Remi Monthiller to vary the particle shape (with clumps)
- add a bidisperse script (adapted by Remi Chassagne) and new associated post processing (made by R. Chassagne)
- add a pipe flow example
- add two validations scripts for the lubrication modelling of HydroForceEngine and Law2_ScGeom_ViscElPhys_Basic
- add a validation/comparison script to compare the results of two exact same simulation with two different yade version

Author: Raphaël Maurin
Author Date: 2021-09-09 23:03:10 UTC

Law2_ScGeom_ViscElPhys_Basic: add an option to consider lubrication effects
- add an option to evaluate the local Stokes number associated to each collisions and determine the associated effective restitution coefficient

Author: Raphaël Maurin
Author Date: 2021-09-09 22:53:11 UTC

HydroForceEngine: add the possibility to apply lubrication forces

Author: Raphaël Maurin
Author Date: 2021-09-09 22:31:08 UTC

HydroForceEngine: add new mixing length formulations to the fluid resolution
- add the formulation of the mixing length developed by Remi Monthiller (ilm = 4, 5)
- add a mixing length formulation for pipe flow
- fasten the fluid resolution by placing the mixing length out of the time resolution loop (not necessary)
- adapt the fluid resolution to the new averaging formulation/variables

Author: Raphaël Maurin
Author Date: 2021-09-09 22:09:45 UTC

HydroForceEngine: modify and simplify averageProfile()
- merge averageProfile & averageProfilePP
- add a multiclass averaging and replace twoSize options (Remi Monthiller)
- comment & re-organize the files
- keeps compatibility with older scripts

Author: Raphaël Maurin
Author Date: 2021-09-09 15:29:30 UTC

HydroForceEngine: add shape variation example (R. Monthiller)
- add full framework developed by Remi Monthiller to vary the shape of the particles
- minor changes for handling clump in HydroForceEngine
- minor fix for compilation

Author: Raphaël Maurin
Author Date: 2021-09-03 16:05:47 UTC

HydroForceEngine: fix small errors in the fluid resolution
- Threshold the value of the volume fraction in the bed for the mixing length (Li & Sawamoto)
- Fix a mistake in the fluidResolution timing loop (<= instead of <)
- Remove unused variables declarations

Author: Raphaël Maurin
Author Date: 2021-09-04 08:03:05 UTC

Update HydroForceEngine.cpp

Author: Janek Kozicki
Author Date: 2021-08-20 15:23:37 UTC

Try 32bit ASAN build with ENABLE_PARTIALSAT=ON

Author: Janek Kozicki
Author Date: 2021-08-14 23:51:47 UTC

Use debug i386 build instead (asan had some problems)

Author: clang-formatter <clang-formatter>
Author Date: 2021-08-10 14:33:51 UTC

Python Reformat 18/18 - ./scripts/

Author: Janek Kozicki
Author Date: 2021-07-21 19:23:39 UTC

yade --stdperformance N # where N is the number of tests. Remove attempts to filter outliers while the test is running (it was incorrect)

Author: Bruno Chareyre
Author Date: 2021-07-13 16:06:06 UTC

simplify and optimize Ig2_Sphere_PFacet_ScGridCoGeom::projection

Author: Sacha Duverger
Author Date: 2021-06-22 11:32:28 UTC

Change stress and uf computation in PIC

Author: Janek Kozicki
Author Date: 2021-06-03 14:13:59 UTC

[RealHP] add operator/ "__rtruediv__" for int/RealHP. Add __round__ with capability to select how many places we want. Add a note how to get isnan and mpmath.mpf to work.

Author: Jérôme Duriez
Author Date: 2021-05-10 11:09:16 UTC

Updating momentRotationLaw doc in CohFrict classes

Author: Anton Gladky
Author Date: 2021-05-06 20:08:37 UTC

Add mpi-default-bin to depends of yadedaily. Fixes #216

Author: Bruno Chareyre
Author Date: 2021-03-31 23:15:45 UTC

Update .gitlab-ci.yml

Author: Jérôme Duriez
Author Date: 2021-04-12 12:29:47 UTC

Re-unifying toSimulation docstring, doctest-skipping the precision-problematic line about rotated cell.hSize

Author: Bruno Chareyre
Author Date: 2020-05-21 18:33:27 UTC

enable sphinx doctest as part of 'make doc'

Author: Anton Gladky
Author Date: 2021-03-15 18:33:07 UTC

Add some needed dependencies for yade-deb

Author: Janek Kozicki
Author Date: 2021-03-14 13:45:02 UTC

Reproduce issue #117

Author: clang-formatter <clang-formatter>
Author Date: 2021-03-10 18:01:27 UTC

clang reformat

Author: Janek Kozicki
Author Date: 2021-03-10 15:01:39 UTC

Avoid multiple definitions of enum UseFlowSolver

This reverts commit 02f1f73145294416c5f2b67111d3528f38c175ba.

Author: Gael Lorieul
Author Date: 2021-03-08 22:49:44 UTC

Fix issue #184 (aka question #694548)

Author: Janek Kozicki
Author Date: 2021-03-07 03:50:11 UTC

[HP] small fix: don't test Constants.hpp three times. Once is enough.

Author: Vasileios Angelidakis
Author Date: 2021-02-23 19:59:35 UTC

Case3: Facets from TUHH server; remove M2; download walls once.

Author: Bruno Chareyre
Author Date: 2021-01-28 13:28:11 UTC

enable integrating normal force with explicit Euler (off by default)

Author: bchareyre
Author Date: 2021-02-18 21:21:45 UTC

update eigen source in nix scripts (HP update)

Author: Anton Gladky
Author Date: 2021-01-24 11:54:11 UTC

Use canonical debian-bullseye image

Author: Janek Kozicki
Author Date: 2021-01-10 16:02:56 UTC

Split expose into more files. (2)

Author: Bruno Chareyre
Author Date: 2021-01-20 20:37:46 UTC

fix '<' vs '<=' inconsistency between python test and collider behavior

Author: Janek Kozicki
Author Date: 2021-01-20 17:51:36 UTC

Invoke CREATE_CPP_LOCAL_LOGGER without enclosing string quotes "...."

Author: Janek Kozicki
Author Date: 2021-01-19 23:34:42 UTC

RealHP works only on distros released in year 2020 and after.

Author: clang-formatter <clang-formatter>
Author Date: 2021-01-19 18:42:17 UTC

scripts/clang-formatter.sh ./ # reformat everything, only pkg/pfv and lib/triangulation changes

Author: clang-formatter <clang-formatter>
Author Date: 2021-01-17 19:11:52 UTC

scripts/clang-formatter.sh ./ # apply don't align consecutive =

Author: Anton Gladky
Author Date: 2021-01-17 17:56:07 UTC

Update Changelog (Janek, thanks a lot!)

Author: Bruno Chareyre
Author Date: 2021-01-17 17:14:58 UTC

escape HP in a colliderTorture.py - needs improvement, see https://gitlab.com/yade-dev/trunk/-/merge_requests/593#note_487216634

Author: Janek Kozicki
Author Date: 2021-01-14 10:06:07 UTC

don't repeat job after timeout (because MPI gets stuck)

Author: Janek Kozicki
Author Date: 2021-01-10 16:02:56 UTC

Split expose into more files. (2)

Author: Janek Kozicki
Author Date: 2020-12-18 23:09:46 UTC

Thermal only works with yade -j1 so disable OpenMP requirement. When bringing it back use for example #ifdef YADE_OPENMP before pragma.

Author: Bruno Chareyre
Author Date: 2020-12-20 19:35:01 UTC

real world checkScript for MPI based on DEM8 - including erasing bodies

Author: Janek Kozicki
Author Date: 2020-12-18 00:16:29 UTC

Revert "Split Polyhedra.cpp, TwoPhaseFlowEngine.cpp in half. Hope it will use less than 4GB RAM when compiling with debug info."

This reverts commit cddbbb4b4b3372e9884ec381b8379c412dfc7c5d.

Author: Robert Caulk
Author Date: 2020-12-17 10:18:08 UTC

add thermalengine check

Author: Robert Caulk
Author Date: 2020-12-17 09:40:44 UTC

using original #pragma parallelization and null body pointer checks

Author: Bruno Chareyre
Author Date: 2020-11-23 12:45:49 UTC

mpi checkTest for openmpi3 only (for now)

Author: Janek Kozicki
Author Date: 2020-07-29 18:04:47 UTC

faster compilation: Split yadeWrapper.cpp into two smaller files.

Author: Luc OGER
Author Date: 2020-07-27 12:47:33 UTC

avoid this message : "The constructor with a shareWidget is deprecated, use the regular contructor instead."

Author: debian-buster-ytest
Author Date: 2020-07-18 12:48:39 UTC

results: didn't help much/at all

Author: Janek Kozicki
Author Date: 2020-07-16 18:36:39 UTC

previous benchmark file